G262-ZL0 (rev. A00)
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | 2 |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | 4 |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 | HPC Server - 2U DP SXM4 A100 4 GPU Server Liquid Cooling Solution Application: AI , AI Training , AI Inference & HPC |
AMD第3世代EPYC 7003シリーズについて
製品仕様
| Dimensions (WxHxD, mm) | 2U 448 x 86.8 x 800 |
|---|---|
| Motherboard | MZ62-HD5 Rev. 3.0 |
| CPU | AMD EPYC™ 7003 series processor family Dual processors, 7nm Up to 64-core, 128 threads per processor cTDP up to 280W NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable Compatible with AMD EPYC™ 7002 series processor family |
| Socket | Socket SP3 |
| Chipset | System on Chip |
| Memory | 16 x DIMM slots DDR4 memory supported only 8-Channel memory per processor architecture RDIMM modules up to 128GB supported LRDIMM modules up to 128GB supported 3DS RDIMM/LRDIMM modules up to 256GB supported Memory speed: Up to 3200/ 2933 MHz |
| LAN | Front Side: 2 x 1GbE LAN ports (1 x Intel® I350-AM2) 1 x 10/100/1000 management LAN |
| Video | Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp, DDR4 SDRAM |
| Audio | N/A |
| Storage | 4 x 2.5" Gen4 U.2 NVMe/ SATA/ SAS hot-swappable HDD/SSD bays SAS card is required for SAS devices support |
| SAS | Depends on optional SAS Card |
| RAID | Depends on optional SAS Card |
| Peripheral Drives | N/A |
| Expansion Slots | 4 x SXM4 sockets for NVIDIA HGX™ A100 4-GPU 40GB/80GB module Total 5 x Low profile Gen4 x16 expansion slots - Front Side: 1 x Low profile Gen4 x16 expansion slots - Rear Side: 4 x Low profile Gen4 x16 expansion slots 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0 Supported NCSI function by onboard NCSI_SW 1 x M.2 slot: (Onboard) - M-key - PCIe Gen4 x4 - Supports NGFF-2280/22110 cards 2 x M.2 slos: (From CMTP072) - M-key - PCIe Gen4 x4 - Supports NGFF-2242/2260/2280/22110 cards |
| Internal I/O | 1 x TPM header 1 x Front panel header |
| Front I/O | 2 x USB 3.0 1 x mini-DP 2 x RJ45 1 x MLAN 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x System status LED 1 x HDD access LED |
| Rear I/O | N/A |
| Backplane I/O | 4 x 2.5" NVMe/ SATA hybrid ports Speed and bandwidth: PCIe Gen4 or SATA 6Gb/s |
| TPM | 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 |
| Power Supply | 2 x 3000W redundant power supply 80 PLUS Platinum AC Input: - 115-127V~/ 14.2A, 50-60Hz - 200-240V~/ 15.8A, 50-60Hz DC Input: 240Vdc/ 14A DC Output: - Max 1200W/ 100-127V~ +54V/ 95.6A +12Vsb/ 3.5A - Max 3000W/ 200-240V~ +54V/ 178.1A +12Vsb/ 3.5A NOTE: The system power supply requires C19 type power cord |
| System Management | Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
| OS Compatibility | Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 8.3 ( x64) or later SUSE Linux Enterprise Server 12 SP5 ( x64) or later SUSE Linux Enterprise Server 15 SP2 ( x64) or later Ubuntu 18.04.5 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.7 Update3 P03 or later VMware ESXi 7.0 Update1 or later Citrix Hypervisor 8.2.0 or later |
| System Fans | 2 x 60x60x76mm (21,700rpm) 2 x 80x80x80mm (17,000rpm) |
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) NOTE: In the event that the room's relative humidity exceeds 60% then the inlet water temperature must be set between 40° to 45°C to avoid condensation and to keep the system running optimally |
| Packaging Dimensions | 1077 x 679 x 300 mm |
| Packaging Content | 1 x G262-ZL0 1 x Rail kit |
| Part Numbers | Barebone with rail kit: 6NG262ZL0MR-A* (40GB module) Barebone with rail kit: 6NG262ZL0MR-G* (80GB module) - Motherboard: 9MZ62HD5NR-00 - CPU liquid cooling kit: 25ST7-200006-C4R - GPU liquid cooling kit: 25ST7-3000G3-C4R - Rail kit: 25HB2-A86102-K0R - Back plane board_2-port: 9COBP540NR-00 - Front panel board: 9CFP1000NR-00 - Power supply: 25EP0-230003-D0S - C19 type power cord 125V/15A (US): 25CP1-018000-Q0R (optional) - C19 type power cord 250V/16A (EU): 25CP3-01830H-Q0R (optional) |
