R262-ZA1 (rev. 100)
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 |
製品仕様
| Dimensions (WxHxD, mm) | 2U 438 x 87.5 x 730 |
|---|---|
| Motherboard | MZA2-CE0 |
| CPU | AMD EPYC™ 7002 series processor family Single processor, 7nm technology Up to 64-core, 128 threads per processor Fully support 280W Compatible with AMD EPYC™ 7001 series processor family |
| Socket | Socket SP3 |
| Chipset | System on Chip |
| Memory | 16 x DIMM slots DDR4 memory supported only 8-Channel memory architecture RDIMM modules up to 128GB supported LRDIMM modules up to 128GB supported Memory speed: Up to 3200*/ 2933 MHz - Note: * Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC |
| LAN | 2 x 1GbE LAN ports (1 x Intel® I350-AM2) 1 x 10/100/1000 management LAN |
| Video | Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp |
| Audio | N/A |
| Storage | Front side: 12 x 3.5" hot-swappable HDD/SSD bays - * 12 x blue HDD/SSD trays compatible with SATA/SAS devices Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays SAS card is required to enable the drive bays Default configuration supports: 4 x 3.5" SATA/SAS drives in front side 2 x 2.5" SATA/SAS drives in rear side Recommended 12Gb/s SAS cards: CRA4448 CRA3338 * NOTE: 8 x blue HDD/SSD trays are enabled by optional SAS Card |
| SAS | Depends on SAS add-on card |
| RAID | Depends on SAS add-on card |
| Peripheral Drives | N/A |
| Expansion Slots | Riser Card CRS2027: - 1 x PCIe x8 slot (Gen4 x8), Low profile half-length - 1 x PCIe x8 slot (Gen4 x8), Low profile half-length Riser Card CRS2225: - 1 x PCIe x16 slot (Gen4 x16 or x8), Full height half-length - 1 x PCIe x8 slot (Gen4 x0 or x8), Full height half-length - 1 x PCIe x16 slot (Gen4 x16), Full height half-length Riser Card CRS2225: - 1 x PCIe x16 slot (Gen4 x16 or x8), Full height half-length - 1 x PCIe x8 slot (Gen4 x0 or x8), Full height half-length - 1 x PCIe x16 slot (Gen3 x16 or x8, shared with OCP2.0 mezzanine slot), Full height half-length Internal Riser Card CRS101H: - 1 x PCIe x16 slot (Gen4 x16), Full height half-length 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared with CRS2225 1 x M.2 slot: - M-key - PCIe Gen4 x4 - Supports NGFF-2280/22110 cards |
| Internal I/O | 1 x M.2 slot 1 x USB 3.0 header 1 x COM header 1 x TPM header 1 x OCP 3.0 mezzanine slot 1 x OCP 2.0 mezzanine slot 1 x Front panel header 1 x HDD back plane board header 1 x PMBus connector 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper |
| Front I/O | 2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x NMI button 1 x Reset button 2 x LAN activity LEDs 1 x HDD activity LED 1 x System status LED |
| Rear I/O | 2 x USB 3.0 1 x VGA 2 x RJ45 1 x MLAN 1 x ID button with LED |
| Backplane I/O | Front side_CBP20C5: 12 x SATA/SAS ports Rear side_CBP2022: 2 x SATA/SAS ports Speed and bandwidth: SAS 12Gb/s, SATA 6Gb/s |
| TPM | 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 |
| Power Supply | 2 x 1200W redundant PSUs 80 PLUS Platinum AC Input: - 100-240V~/ 12-7A, 50-60Hz DC Input: - 240Vdc/ 6A DC Output: - Max 1000W/ 100-240V~ +12V/ 80.5A +12Vsb/ 3A - Max 1200W/ 200-240V~ or 240Vdc input +12V/ 97A +12Vsb/ 3A |
| System Management | Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
| OS Compatibility | Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 7.6 ( x64) or later Red Hat Enterprise Linux 8.0 ( x64) or later SUSE Linux Enterprise Server 12 SP4 ( x64) or later SUSE Linux Enterprise Server 15 SP1 ( x64) or later Ubuntu 16.04.6 LTS (x64) or later Ubuntu 18.04.3 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.5 EP15 or later VMware ESXi 6.7 Update3 or later VMware ESXi 7.0 or later Citrix Hypervisor 8.1.0 or later |
| System Fans | 4 x 80x80x38mm (16,300rpm), 2-ball |
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
| Packaging Dimensions | 982 x 588 x 268 mm |
| Packaging Content | 1 x R262-ZA1 1 x CPU heatsink 1 x Rail kit |
| Part Numbers | Barebone package: 6NR262ZA1MR-00 Spare parts: - Motherboard: 9MZA2CE0NR-00 - Rail kit: 25HB2-3A0202-K0R - CPU heatsink: 25ST1-15320E-J1R - Front panel board: 9CFP2001NR-00 - Back plane board ( Front): 9CBP20C5NR-00 - Back plane board ( Rear): 9CBP2022NR-00 - Power supply: 25EP0-212008-D0S - Riser card - CRS2027: 9CRS2027NR-00 - Riser card - CRS2225: 9CRS2225NR-00 - Riser card - CRS101H: 9CRS101HNR-00 |
