製品情報

R262-ZA2 (rev. 100)

製品種別 サーバ
CPUソケット数 1
CPU  
筐体サイズ 2U
最大GPU数
電源仕様 リダンダント電源
用途/特長  
製品説明

製品仕様

Dimensions (WxHxD, mm) 2U
438 x 87.5 x 730
Motherboard MZA2-CE0
CPU AMD EPYC™ 7002 series processor family
Single processor, 7nm technology
Up to 64-core, 128 threads per processor
Fully support 280W

Compatible with AMD EPYC™ 7001 series processor family
Socket Socket SP3
Chipset System on Chip
Memory 16 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200*/ 2933 MHz

- Note:
* Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
LAN 2 x 1GbE LAN ports (1 x Intel® I350-AM2)
1 x 10/100/1000 management LAN
Video Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
Audio N/A
Storage Front side:
12 x 3.5" hot-swappable HDD/SSD bays
- 4 x green HDD/SSD trays compatible with SATA/SAS/NVMe devices
- 8 x blue HDD/SSD trays compatible with SATA/SAS devices, enabled by optional SAS Card

Rear side:
2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays

SAS card is required to enable the drive bays

Default configuration supports:
4 x 3.5" SATA/SAS/NVMe drives in front side
2 x 2.5" SATA/SAS drives in rear side

Recommended 12Gb/s SAS cards:
CRA4448
CRA3338
SAS N/A
RAID N/A
Peripheral Drives N/A
Expansion Slots Riser Card CRS2027:
- 1 x PCIe x8 slot (Gen4 x8), Low profile half-length
- 1 x PCIe x8 slot (Gen4 x8), Low profile half-length

Riser Card CRS2225:
- 1 x PCIe x16 slot (Gen4 x16 or x8), FHFL
- 1 x PCIe x8 slot (Gen4 x0 or x8), FHFL
- 1 x PCIe x16 slot (Gen4 x16), FHFL

Riser Card CRS2225:
- 1 x PCIe x16 slot (Gen4 x16 or x8), FHFL
- 1 x PCIe x8 slot (Gen4 x0 or x8), FHFL
- 1 x PCIe x16 slot, FHFL, (Gen3 x16 or x8, shared with OCP2.0 mezzanine slot), Full height half-length

Internal Riser Card CRS101H:
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length, occupied by CNV3134, 4 x NVMe Card

1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth

1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared with CRS2225

1 x M.2 slot:
- M-key
- PCIe Gen4 x4
- Supports NGFF-2280/22110 cards
Internal I/O 1 x M.2 slot
1 x USB 3.0 header
1 x COM header
1 x TPM header
1 x OCP 3.0 mezzanine slot
1 x OCP 2.0 mezzanine slot
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O 2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Rear I/O 2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane I/O Front side_CBP20C5: 12 x SATA/SAS/NVMe ports
Rear side_CBP2022: 2 x SATA/SAS ports

Speed and bandwidth:
SAS 12Gb/s, SATA 6Gb/s, PCIe Gen4 x4
TPM 1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply 2 x 1600W redundant PSUs
80 PLUS Platinum

AC Input:
- 100-127V~/ 12A, 47-63Hz
- 200-240V~/ 9.48A, 47-63Hz

DC Output:
- Max 1000W/ 100-127V
+12V/ 82A
+12Vsb/ 2.1A
- Max 1600W/ 200-240V
+12V/ 132A
+12Vsb/ 2.1A
System Management Aspeed® AST2500 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

  • Dashboard
  • JAVA Based Serial Over LAN
  • HTML5 KVM
  • Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
  • Sensor Reading History Data
  • FRU Information
  • SEL Log in Linear Storage / Circular Storage Policy
  • Hardware Inventory
  • Fan Profile
  • System Firewall
  • Power Consumption
  • Power Control
  • LDAP / AD / RADIUS Support
  • Backup & Restore Configuration
  • Remote BIOS/BMC/CPLD Update
  • Event Log Filter
  • User Management
  • Media Redirection Settings
  • PAM Order Settings
  • SSL Settings
  • SMTP Settings
OS Compatibility Windows Server 2016 ( X2APIC/256T not supported)
Windows Server 2019

Red Hat Enterprise Linux 7.6 ( x64) or later
Red Hat Enterprise Linux 8.0 ( x64) or later

SUSE Linux Enterprise Server 12 SP4 ( x64) or later
SUSE Linux Enterprise Server 15 SP1 ( x64) or later

Ubuntu 16.04.6 LTS (x64) or later
Ubuntu 18.04.3 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later

VMware ESXi 6.5 EP15 or later
VMware ESXi 6.7 Update3 or later
VMware ESXi 7.0 or later

Citrix Hypervisor 8.1.0 or later
System Fans 4 x 80x80x38mm (16,300rpm), 2-ball
Operating Properties Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Packaging Dimensions 982 x 588 x 268 mm
Packaging Content 1 x R262-ZA2
1 x CPU heatsink
1 x Rail kit
Part Numbers Barebone package: 6NR262ZA2MR-00
Spare parts:
- Motherboard: 9MZA2CE0NR-00
- Rail kit: 25HB2-3A0202-K0R
- CPU heatsink: 25ST1-443107-A3R
- Front panel board: 9CFP2001NR-00
- Back plane board ( Front): 9CBP20C5NR-00
- Back plane board ( Rear): 9CBP2022NR-00
- Power supply: 25EP0-216008-L0S
- Riser card - CRS2027: 9CRS2027NR-00
- Riser card - CRS2225: 9CRS2225NR-00
- Riser card - CRS101H: 9CRS101HNR-00
- 4 x ports NVMe Card - CNV3134: 9CNV3134NR-00