R271-Z00 (rev. B00)
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | 1 |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 |
AMD第3世代EPYC 7003シリーズについて
製品仕様
| Dimensions (WxHxD, mm) | 2U 430 x 87 x 710 mm |
|---|---|
| Motherboard | MZ01-CE1 Rev. 3.0 |
| CPU | AMD EPYC™ 7003 series processor family Single processor, 7nm, Socket SP3 Up to 64-core, 128 threads per processor TDP up to 225W, cTDP up to 240W Fully support 280W Compatible with AMD EPYC™ 7002 series processor family |
| Socket | Socket SP3 |
| Chipset | System on Chip |
| Memory | 8 x DIMM slots DDR4 memory supported only 8-Channel memory architecture RDIMM modules up to 128GB supported LRDIMM modules up to 128GB supported 3DS RDIMM/LRDIMM modules up to 256GB supported Memory speed: Up to 3200*/ 2933 MHz - Note: * Follow BIOS setting and memory QVL list if running 3200 Mhz |
| LAN | 2 x 1Gb/s LAN ports (Intel® I210-AT) 1 x 10/100/1000 management LAN |
| Video | Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp |
| Audio | N/A |
| Storage | Front side: 12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays 2.5" HDD/SSD supported Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays Front side default configuration supports: 12 x SATA drives or 4 x SATA drives 8 x SAS drives SAS card is required for SAS devices support |
| SAS | N/A |
| RAID | N/A |
| Peripheral Drives | N/A |
| Expansion Slots | Total 5 x low profile PCIe Gen3 expansion slots - Slot_7 (PCIe_7): 1 x PCIe x16 (Gen3 x16 bus) - Slot_5 (PCIe_5): 1 x PCIe x16 (Gen3 x16 bus) - Slot_4 (PCIe_4): 1 x PCIe x8 (Gen3 x8 bus) - Slot_3 (PCIe_3): 1 x PCIe x16 (Gen3 x16 bus) - Slot_1 (PCIe_1): 1 x PCIe x16 (Gen3 x16 bus) 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports NGFF-2242/2260/2280/22110 cards |
| Internal I/O | 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors 4 x SlimSAS connectors 1 x M.2 slot 1 x CPU fan headers 6 x System fan headers 1 x USB 3.0 header 2 x COM headers 1 x TPM header 1 x Front panel header 1 x HDD back plane board header 1 x PMBus connector 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper |
| Front I/O | 2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x NMI button 1 x System status LED 1 x HDD activity LED 2 x LAN activity LEDs |
| Rear I/O | 2 x USB 3.0 1 x VGA 2 x RJ45 1 x MLAN 1 x ID switch with LED 1 x Power switch with LED |
| Backplane I/O | Backplane P/N: 9CBP20C3NR-00 Speed and bandwidth: SAS 12Gb/s, SATA 6Gb/s |
| TPM | 1 x TPM header with LPC interface Optional TPM2.0 kit: CTM000 |
| Power Supply | 2 x 800W redundant PSUs 80 PLUS Platinum AC Input: - 100-240V~/ 10-4A, 50-60Hz DC Input: - 240Vdc/ 4.5A DC Output: - 800W +12V/ 66A +12Vsb/ 2.5A |
| System Management | Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
| OS Compatibility | Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 8.3 ( x64) or later SUSE Linux Enterprise Server 12 SP5 ( x64) or later SUSE Linux Enterprise Server 15 SP2 ( x64) or later Ubuntu 18.04.5 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.7 Update3 P03 or later VMware ESXi 7.0 Update1 or later Citrix Hypervisor 8.2.0 or later |
| System Fans | 4 x 80x80x38mm (16300rpm) |
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
| Packaging Dimensions | 982 x 588 x 268 (mm) |
| Packaging Content | 1 x R271-Z00 system 1 x CPU heatsink 1 x Rail kit |
| Part Numbers | Rackmount: 6NR271Z00MR-00 Rev. B00 Motherboard: 9MZ01CE1NR-00 Rev. 3.0 Back plane board: 9CBP20C3NR-00 CPU heatsink: 25ST1-15320E-J1R Fan module: 25ST2-883829-D0R Power supply: 25EP0-208004-L0S Rail Kit: 25HB2-3A0202-K0R |
