R282-Z91 (rev. A00)
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 |
AMD第3世代EPYC 7003シリーズについて
製品仕様
| Dimensions (WxHxD, mm) | 2U 438 x 87 x 730 mm |
|---|---|
| Motherboard | MZ92-FS0 Rev. 3.0 |
| CPU | AMD EPYC™ 7003 series processor family Dual processors, 7nm, Socket SP3 Up to 64-core, 128 threads per processor TDP up to 225W, cTDP up to 240W Fully support 280W NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable Compatible with AMD EPYC™ 7002 series processor family |
| Chipset | System on Chip |
| Memory | 32 x DIMM slots DDR4 memory supported only 8-Channel memory per processor architecture RDIMM modules up to 128GB supported LRDIMM modules up to 128GB supported 3DS RDIMM/LRDIMM modules up to 256GB supported Memory speed: Up to 3200*/ 2933 MHz - Note: * Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC |
| LAN | 2 x 1GbE LAN ports (1 x Intel® I350-AM2) 1 x 10/100/1000 management LAN |
| Video | Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp |
| Audio | N/A |
| Storage | Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays, connected to SAS expander Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays, connected to SAS expander Broadcom SAS35x36R expander Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port Default configuration supports: 0 x SAS/SATA drives SAS card is required to enable the SAS drives Suggested 12Gb/s SAS cards: CRA4448 CRA3338 |
| RAID | N/A |
| Peripheral Drives | N/A |
| Expansion Slots | Riser Card CRS2027: - 1 x PCIe x8 slot (Gen4 x8), Low profile half-length - 1 x PCIe x8 slot (Gen4 x8), Low profile half-length Riser Card CRS2033: - 1 x PCIe x16 slot (Gen4 x16), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL Riser Card CRS2033: - 1 x PCIe x16 slot (Gen4 x16), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0 Supported NCSI function 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2) Supported NCSI function 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports NGFF-2242/2260/2280/22110 cards - CPU TDP is limited to 225W if using M.2 device |
| Internal I/O | 1 x M.2 slot 1 x USB 3.0 header 1 x COM header 1 x TPM header 1 x Front panel header 1 x HDD back plane board header 1 x PMBus connector 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper |
| Front I/O | 2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x NMI button 1 x System status LED 1 x HDD activity LED 2 x LAN activity LEDs |
| Rear I/O | 2 x USB 3.0 1 x VGA 2 x RJ45 1 x MLAN 1 x ID button with LED |
| Backplane I/O | Front side_CBP20O5: 24 x SATA/SAS ports Rear side_CBP2020: 2 x SATA/SAS ports Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port |
| TPM | 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 |
| Power Supply | 2 1600W redundant PSUs 80 PLUS Platinum AC Input: - 100-120V~/ 12A, 50-60Hz - 200-240V~/ 10.0A, 50-60Hz DC Input: 240Vdc, 10A DC Output: - Max 1000W/ 100-120V~ +12V/ 81.5A +12Vsb/ 2.5A - Max 1600W at 200-240V or 240Vdc Input +12V/ 133A +12Vsb/ 2.5A |
| System Management | Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
| OS Compatibility | Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 8.3 ( x64) or later SUSE Linux Enterprise Server 12 SP5 ( x64) or later SUSE Linux Enterprise Server 15 SP2 ( x64) or later Ubuntu 18.04.5 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.7 Update3 P03 or later VMware ESXi 7.0 Update1 or later Citrix Hypervisor 8.2.0 or later |
| Weight | Net Weight: 18.5 kg Gross Weight: 25.5 kg |
| System Fans | 4 x 80x80x38mm (16,300rpm) |
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
| Packaging Dimensions | 982 x 588 x 268 (mm) |
| Packaging Content | 1 x R282-Z91 system 2 x CPU heatsinks 1 x Rail kit |
| Part Numbers | Barebone package: 6NR282Z91MR-00 Rev. A00 Spare parts: - Motherboard: 9MZ92FS0NR-00 - Rail kit: 25HB2-3A0202-K0R - CPU heatsink: 25ST1-15320E-J1R - Back plane board_24-port: 9CBP20O5NR-00 - Back plane board_2-port: 9CBP2020NR-00 - Expander board: 9CEP26O0NR-00 - Front panel board: 9CFP2001NR-00 - Fan module: 25ST2-883829-D0R - 4 x NVMe optional kit: 6NR282Z9CSR-00-100 - Power supply: 25EP0-216008-L0S |
