R284-S91-AAJ2
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | 2 |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 | デュアル Intel® Xeon® 6700/6500 シリーズ・プロセッサー
8 チャネル DDR5 RDIMM/MRDIMM、32 x DIMM
デュアル ROM アーキテクチャ
Intel® I350-AM2 経由 2 x 1Gb/s LAN ポート
16 x E3.S Gen5 NVMe ホットスワップ・ベイ
CXL メモリ拡張モジュール用 8 x E3.S 2T ベイ
背面に 2 x 2.5" SATA/SAS-4 ホットスワップ・ベイ
2 x M.2 スロット（PCIe Gen5 x4 インターフェース）
1 x FHHL PCIe Gen5 x16 スロット
1 x OCP NIC 3.0 PCIe Gen5 x16 スロット
1+1 2000W 80 PLUS Titanium 冗長電源 |
製品仕様
| Dimensions (WxHxD, mm) | 2U 438 x 87.5 x 815 |
|---|---|
| Motherboard | MS94-FS0 |
| CPU | Intel® Xeon® 6 Processors - Intel® Xeon® 6700-Series Processors - Intel® Xeon® 6500-Series Processors Dual processor, TDP up to 350W [Note] If only 1 CPU is installed, some PCIe or memory functions might be unavailable. |
| Socket | 2 x LGA 4710 Socket E2 |
| Chipset | System on Chip |
| Memory | 32 x DIMM slots DDR5 memory supported 8-Channel memory per processor MRDIMM supported [1] RDIMM: Up to 6400 MT/s (1DPC), 5200 MT/s (2DPC) MRDIMM: Up to 8000 MT/s CXL memory expansion module: 4 x E3.S 2T (Gen5 x8), from CPU_0 4 x E3.S 2T (Gen5 x8), from CPU_1 [1] MRDIMMs are only supported with Intel® Xeon® 6 Processors with P-cores and in a 1DPC configuration. |
| LAN | Rear (I/O board - CDCR010): 2 x 1Gb/s LAN (1 x Intel® I350-AM2) - Support NCSI function 1 x 10/100/1000 Mbps Management LAN |
| Video | Integrated in ASPEED® AST2600 - 1 x Mini-DP |
| Storage | Front hot-swap: 16 x E3.S Gen5 NVMe - (8 x NVMe from CPU_0, 8 x NVMe from CPU_1) Rear hot-swap: 2 x 2.5" SATA/SAS-4 [1] - (SATA from CPU_0, through I/O board) Internal M.2: 2 x M.2 (2280/22110), PCIe Gen5 x4, from CPU_1 Internal M.2 (I/O board - CDCR010): 1 x M.2 (2280), PCIe Gen5 x2, from CPU_0, occupied for SATA [1] SAS card is required to support SAS drives. |
| SAS | Require SAS add-in cards |
| RAID | Require RAID add-in cards Onboard VROC key header |
| PCIe Expansion Slots | Riser Card CRS101K: - 1 x FHHL x16 (Gen5 x16), from CPU_1 1 x OCP NIC 3.0 (Gen5 x16), from CPU_0 - Supports NCSI function 1 x OCP NIC 3.0 (Gen5 x16), from CPU_1, occupied for NVMe |
| Front I/O | 2 x USB 3.2 Gen1 ports (Type-A) 1 x Power button with LED 1 x ID button with LED 1 x NMI button 1 x Reset button 2 x LAN activity LEDs 1 x Storage activity LED 1 x System status LED |
| Rear I/O | I/O board - CDCR010: 2 x USB 3.2 Gen1 ports (Type-A) 1 x Mini-DP 2 x RJ45 ports 1 x MLAN port 1 x ID LED |
| Backplane Board | Speed and bandwidth: Front side - CBP20E0: PCIe Gen5 x4 Front side - CBP20P0: PCIe Gen5 x4 Rear side - CBP2025: SATA 6Gb/s or SAS-4 24Gb/s |
| Security Modules | 1 x TPM header with SPI interface - Optional TPM2.0 kit: CTM012 1 x PRoT connector (only enabled on RoT SKU) |
| Power Supply | 1+1 2000W 80 PLUS Titanium redundant power supplies AC Input: - 100-127V~/ 13A, 50-60Hz - 200-220V~/ 10A, 50-60Hz - 220-240V~/ 10A, 50-60Hz DC Input: (Only for China) - 240Vdc/ 10A DC Output: - Max 1000W/ 100-127V~ +12.2V/ 82A +12.2Vsb/ 3A - Max 1800W/ 200-220V~ +12.2V/ 148A +12.2Vsb/ 3A - Max 2000W/ 220-240V~ or 240Vdc Input +12.2V/ 164A +12.2Vsb/ 3A [Note] GIGABYTE offers PSUs with various efficiency ratings and power outputs. Full redundancy may depend on your server configuration, and alternative PSU options may be needed. Please contact our sales representatives for the best power solution. |
| System Management | ASPEED® AST2600 Baseboard Management Controller GIGABYTE Management Console web interface
|
| OS Compatibility | Please refer to OS compatibility table in support page |
| System Fans | 4 x 80x80x38mm (16,000rpm) |
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
| Packaging Dimensions | 1082 x 685 x 314 mm |
| Packaging Content | 1 x R284-S91-AAJ2 2 x CPU heatsinks 1 x Mini-DP to D-Sub cable 4 x Carriers 1 x 2-Section Rail kit |
| Part Numbers | - Barebone package: 6NR284S91DR000AAJ2* - Motherboard: 9MS94FS0UR-000* - 2-Section Rail kit (CMA not supported): 25HB2-3A0206-K0R - CPU heatsink: 25ST1-323208-A0R - M.2 heatsink: 12SP2-11000E-00R - Front panel board - CFP2001: 9CFP2001NR-00* - Backplane board - CBP2025: 9CBP2025NR-00* - Backplane board - CBP20E0: 9CBP20E0NR-00* - Backplane board - CBP20P0: 9CBP20P0NR-00* - Fan module: 25ST2-88382Y-A0R - M.2 type SATA card - CRS2810: 9CRS2810NR-00* - Riser card - CRS101K: 9CRS101KNR-00* - I/O board with M.2 slot - CDCR010: 9CDCR010NR-00* - Mini-DP to D-Sub cable: 25CRN-200801-K1R - Power supply: 25EP0-22000L-G1S Optional parts: - 3-Section Rail kit (Supports CMA): 25HB2-A56121-K0R - Cable Management Arm: 25HB1-R18300-K0R - RMA packaging: 6NR284S91SR-RMA-A100 |
