製品情報

R283-ZK0-AAL1 (rev. 3.x)

製品種別 サーバ
CPUソケット数 2
CPU  
 
筐体サイズ 2U
最大GPU数
電源仕様 リダンダント電源
用途/特長  
製品説明
デュアルAMD EPYC™ 9005/9004シリーズ・プロセッサー
12チャネルDDR5 RDIMM、48 x DIMM
デュアルROMアーキテクチャ
2 x Intel® I350-AM2経由1Gb/秒LANポート
2.5 "Gen5NVMe/SATA/SAS-4ホットスワップベイ x 8
4 x 2.5 "SATA/SAS-4ホットスワップベイ(リア側)
2 x M.2スロット(PCIe Gen3 x4およびx2インターフェイス)
4 x FHHL PCIe Gen5 x16スロット
2 x OCP NIC 3.0 PCIe Gen5 x16スロット
1+1 2700W 80 PLUS Titaniumリダンダント電源

AMD 第4世代 EPYC 9004シリーズについて


製品仕様

Dimensions (WxHxD, mm) 2U
438 x 87.5 x 815
Motherboard MZK3-LM0
CPU AMD EPYC™ 9005 Series Processors
AMD EPYC™ 9004 Series Processors

Dual processor, cTDP up to 500W

[Note] If only 1 CPU is installed, some PCIe or memory functions might be unavailable.
Socket 2 x LGA 6096
Socket SP5
Chipset System on Chip
Memory 48 x DIMM slots
DDR5 memory supported
12-Channel memory architecture

AMD EPYC™ 9005:
RDIMM: Up to 5200 MT/s (1DPC)
RDIMM: Up to 4400 MT/s (1R 2DPC), 4000 MT/s (2R 2DPC)

AMD EPYC™ 9004:
RDIMM: Up to 4800 MT/s (1DPC), 3600 MT/s (2DPC)
LAN Rear:
2 x 1Gb/s LAN (1 x Intel® I350-AM2)
- Support NCSI function

1 x 10/100/1000 Mbps Management LAN
Video Integrated in Aspeed® AST2600
- 1 x Mini-DP
Storage Front hot-swap:
8 x 2.5" Gen5 NVMe/SATA/SAS-4 [1]
- (4 x NVMe from CPU_0, 4 x NVMe from CPU_1)

Rear hot-swap:
4 x 2.5" SATA/SAS-4 [2]
- (SATA via CRS2810 from CPU_0)

Internal M.2:
1 x M.2 (2280/22110), PCIe Gen3 x4, from CPU_0, occupied for SATA
1 x M.2 (2280/22110), PCIe Gen3 x4, from CPU_1
1 x M.2 (2280/22110), PCIe Gen3 x2, from CPU_1

[1] Storage card is required to support SATA and SAS drives.
[2] SAS card is required to support SAS drives.

[Note] SATA hotplug utility can be downloaded on support page.
SAS Require SAS add-in cards
RAID Require RAID add-in cards
PCIe Expansion Slots PCIe Cable x 4:
- 1 x FHHL x16 (Gen5 x16), from CPU_0
- 3 x FHHL x16 (Gen5 x16), from CPU_1

2 x OCP NIC 3.0 (Gen5 x16), from CPU_0
- Support NCSI function
Front I/O 2 x USB 3.2 Gen1 ports (Type-A)
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x Storage activity LED
1 x System status LED
Rear I/O 2 x USB 3.2 Gen1 ports (Type-A)
1 x Mini-DP
2 x RJ45
1 x MLAN
1 x ID LED
Backplane Board Speed and bandwidth:
Front side - CBP2081: PCIe Gen5 x4 or SATA 6Gb/s or SAS-4 24Gb/s
Rear side - CBP2025: PCIe Gen5 x4 or SATA 6Gb/s or SAS-4 24Gb/s
Security Modules 1 x TPM header with SPI interface
- Optional TPM2.0 kit: CTM012
Power Supply 1+1 2700W 80 PLUS Titanium redundant power supplies [1]

AC Input:
- 100-127V~/ 12A, 50-60Hz
- 200-240V~/ 16A, 50-60Hz

DC Input: (Only for China)
- 240Vdc/ 16A

DC Output:
- Max 1008W/ 100-127V~
+12V/ 84A
+12Vsb/ 3A
- Max 2700W/ 200-240V~ or 240Vdc Input
+12V/ 225A
+12Vsb/ 3A

[1] The system power supply requires C19 power cord.

[Note] GIGABYTE offers PSUs with various efficiency ratings and power outputs. Full redundancy may depend on your server configuration, and alternative PSU options may be needed. Please contact our sales representatives for the best power solution.
System Management Aspeed® AST2600 Baseboard Management Controller
GIGABYTE Management Console web interface

  • Dashboard
  • HTML5 KVM
  • Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
  • Sensor Reading History Data
  • FRU Information
  • SEL Log in Linear Storage / Circular Storage Policy
  • Hardware Inventory
  • Fan Profile
  • System Firewall
  • Power Consumption
  • Power Control
  • Advanced power capping
  • LDAP / AD / RADIUS Support
  • Backup & Restore Configuration
  • Remote BIOS/BMC/CPLD Update
  • Event Log Filter
  • User Management
  • Media Redirection Settings
  • PAM Order Settings
  • SSL Settings
  • SMTP Settings
OS Compatibility Please refer to OS compatibility table in support page
System Fans 4 x 80x80x80mm (13,000rpm)
Operating Properties Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Packaging Dimensions 1077 x 679 x 300 mm
Packaging Content 1 x R283-ZK0-AAL1
2 x CPU heatsinks
1 x Mini-DP to D-Sub cable
1 x 2-Section Rail kit
Part Numbers - Barebone package (EPYC 9005/9004): 6NR283ZK0DR000ACL1*
- Barebone package (EPYC 9004): 6NR283ZK0DR000AAL1*
- Motherboard: 9MZK3LM0UR-000-3*
- 2-Section Rail kit (CMA not supported): 25HB2-3A0206-K0R
- CPU heatsink: 25ST1-563400-C1R
- M.2 heatsink: 12SP2-11000E-00R
- Front panel board - CFP2001: 9CFP2001NR-00*
- Backplane board - CBP2025: 9CBP2025NR-00*
- Backplane board - CBP2081: 9CBP2081NR-00*
- Fan module: 25ST2-808022-A0R
- M.2 type SATA card - CRS2810: 9CRS2810NR-00*
- G-SCM board - CDCR114: 9CDCR114NR-00*
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- Power supply: 25EP0-227000-D0S

Optional parts:

- 3-Section Rail kit (Supports CMA): 25HB2-A56121-K0R
- Cable Management Arm: 25HB1-R18300-K0R