Form Factor |
ATX
305W x 244D (mm) |
CPU |
Supports:
Intel® Xeon® E5-2600 V2 processors
Intel® Xeon® E5-1600 V2 processors
Intel® Xeon® E5-2600 processors
Intel® Xeon® E5-1600 processors
|
Socket |
1 x LGA 2011
Mounting pitch: narrow ILM (56x94mm)Recommended cooling device dimension: 70x106mm
Compatible coolers (for reference only):Noctua NH-U9DX i4
Noctua NH-U12DX i4
Dynatron R27
Dynatron R25
Dynatron R24
Dynatron T318A
Dynatron R23
Dynatron T318
Dynatron R13
Dynatron R19
Dynatron R14
Dynatron R12
Max. length of M4 screw threads: 3.7mmScrews longer than 3.7mm might damage the motherboard |
Chipset |
Intel® C602 |
Memory |
8 x DIMM slots
Quad channel memory architecture
ECC & non-ECC UDIMM/RDIMM modules supported
Single and dual rank UDIMM modules up to 8GB supported
Single, dual and quad rank RDIMM modules up to 32GB supported
1.35V modules: 1066/1333/(1600*) MHz
1.5V modules: 1066/1333/1600/(1866*) MHz
*Supported by Intel® Xeon® E5-2600 V2 processors onlyDownload the detailed memory configuration table for the E5-1600/2600 V2 processorsDownload the detailed memory configuration table for the E5-1600/2600 processors |
LAN |
2 x GbE LAN ports (Intel® 82574L)
1 x 10GbE SFP+ LAN port (Intel® 82599EN) |
Video |
Integrated in Aspeed® AST2400-VB
2D Video Graphic Adapter with PCIe bus interface
128MB memory
1920x1200@60Hz 32bpp |
Audio |
- |
SAS |
- |
SATA |
2 x SATA III 6Gb/s supporting SATA DOM
8 x SATA III 6Gb/s from Marvell® 88SE9230 controller
4 x SATA II 3Gb/s |
RAID |
Intel® SATA RAID 0/1/10/5
Marvell® SATA RAID 0/1/10 |
Expansion Slots |
2 x PCIe x16 (Gen3 x16 bus) slots
or (via PCIe switch):
1 x PCIe x16 (Gen3 x16 bus) slot
2 x PCIe x16 (Gen3 x8 bus) slots |
Internal I/O |
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x PMBus connector
4 x System fan headers
1 x CPU fan header
1 x SATA SGPIO header
1 x SATA port 0 DOM support jumper
1 x SATA port 1 DOM support jumper
1 x BIOS upgrade ROM
10 x SATA III 6Gb/s ports
4 x SATA II 3Gb/s ports
1 x CMOS battery socket
1 x Chassis intrusion jumper
1 x Clear CMOS jumper
1 x Clear password jumper
1 x Front panel header
1 x USB 2.0 Type A connector
1 x Backplane board header
1 x BIOS recovery jumper
1 x BIOS write protect jumper
1 x USB 3.0 header
1 x USB 2.0 header
1 x Serial header
1 x BMC upgrade ROM
1 x TPM header
1 x LAN3 active LED
1 x BMC readiness LED
1 x ME Recovery jumper
1 x PCIE1 and PCIE2 bandwidth switch jumper
1 x PMBus select jumper
1 x Force to stop FRB3 timer jumper
1 x S3 power on select jumper |
Rear I/O |
4 x USB 3.0
2 x USB 2.0
1 x PS/2
1 x Serial
1 x VGA
1 x SFP+
2 x RJ45
1 x ID button with LED |
TPM |
1 x TPM header |
OS Supported |
Windows Server 2008 SP2 (x86/x64)
Windows Server 2008 R2 (x64)
Windows Server 2012 (x64)
Windows 7 SP1 (x86/x64)
Red Hat Enterprise Linux 5.7 (x86/x64)
Red Hat Enterprise Linux 6.1 (x86/x64)
SUSE Linux Enterprise Server 11.1 (x86/x64) |
Board Management |
- |
PSU Connectors |
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector |
Retail Packaging Content |
1 x Driver CD
1 x I/O shield
2 x SATA cables (500mm) |
Reference Numbers |
Retail: 9M6PXSVTMR-SI |