生産終了
5017P-TLN4F
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 1U |
| 最大GPU数 | |
| 電源仕様 | シングル電源 |
| 用途/特長 | |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs | SYS-5017P-TLN4F | SuperServer 5017P-TLN4F (Black) |
|---|---|
| マザーボード | Motherboard | Super X9SPV-LN4F-3QE |
| プロセッサ/キャッシュ | CPU | Embedded 3rd Gen. Intel® Core i7-3612QE Mobile ECC processor (up to 3.1GHz, 6M Cache) |
| メモリ | Memory Capacity | 2x 204-pin DDR3 SODIMM slots Supports up to 16 GB DDR3 ECC memory |
| Memory Type | 1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8GB, 4GB, 2GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| オンボードデバイス | Chipset | Intel® QM77 Chipset |
| SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® 82574L Gigabit Ethernet controllers4x Gigabit LAN ports Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) |
| Graphics | Intel Integrated Graphics HD 4000 or Matrox G200eW to VGA via BIOS setup |
| 標準インターフェース | SATA | 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) |
| LAN | 4x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 4x USB 3.0 ports (via header) 6x USB 2.0 ports (4 rear, 2 via header) |
| VGA | 1x VGA port |
| Serial Port / Header | 2x COM ports (1 rear, 1 header) |
| シャーシ | Form Factor | 1U Rackmount |
| Model | CSE-504-203B |
| 外形寸法/重量 | Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 9.8" (249mm) |
| Weight | Net Weight: 8 lbs (3.62 kg) Gross Weight: 12 lbs (5.44 kg) |
| Available Colors | Black |
| フロントパネル | Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| 拡張スロット | PCI-Express | 1x PCI-E 3.0 x16 slot** |
| ドライブベイ | HDD | 2x 3.5" or 4x 2.5" internal SATA2 hard drive bays (optional) * |
| 電源 | Power Supply | 200W Low Noise AC-DC power supply with PFC |
| AC Voltage | 100 - 240V, 50-60Hz, 2.6 Amp Max |
| +5V | 8.0 Amp (max.) |
| +5V standby | 2.0 Amp (max.) |
| +12V | 16 Amp (max.) |
| -12V | 0.5 Amp (max.) |
| +3.3V | 8.0 Amp (max.) |
| Certification | Gold Certified |
| BIOS | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| 動作環境/コンプライアンス | RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
パーツ仕様
| パーツリスト | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| Motherboard / Chassis | MBD-X9SPV-LN4F-3QE | 1 | Super X9SPV-LN4F-3QE Motherboard |
| Motherboard / Chassis | CSE-504-203B | 1 | 1U Chassis |
| Cable 1 | CBL-0061L | 2 | SATA,INT,FLAT,31.5CM,26AWG |
| Cable 2 | CBL-0082L | 1 | Y split , big 4 pin to two RA SATA power extension 15cm, 18AWG |
| Riser Card | RSC-RR1U-E16 | 1 | RSC-RR1U-E16 with PIC-E x16 output |
| Part | MCP-120-00063-0N | 1 | Riser card bracket for slot-7 in SC504 |
| オプションパーツリスト | |||
| 型番 | 数量 | 内容 | |
| HDD Bracket | MCP-220-00044-0N | Dual 2.5" fixed HDD bracket for SC502, 503, 510, 512, 515U | |
| HDD Bracket | MCP-220-00051-0N | Single 2.5" fixed HDD bracket for SC502, 503, 510, 512, 515U | |
