R264-AG0-AAS1

製品種別 | サーバ |
---|---|
CPUソケット数 | 1 |
CPU | |
筐体サイズ | 2U |
最大GPU数 | 4 |
電源仕様 | リダンダント電源 |
用途/特長 | |
製品説明 | 最大4基のデュアルスロットGen5 GPUをサポート
シングルIntel® Xeon® 6プロセッサー、LGA 7529
12チャンネルDDR5 RDIMM / MRDIMM、12 x DIMMs
デュアルROMアーキテクチャ
2 x 3.5「/2.5 」Gen5NVMe/SATA/SAS-4ホットスワップベイ
10 x 3.5「/2.5 」SATA/SAS-4ホットスワップベイ
PCIe Gen5 x2インターフェイス搭載M.2スロット x 1
PCIe Gen5 x2インターフェイス搭載M.2スロット×1、SATAと共用
GPU用FHFL PCIe Gen5 x16スロット x 4
OCP NIC 3.0 PCIe Gen5 x16スロット x 1
2 x 3200W 80 PLUS Titaniumリダンダント電源 |
製品仕様
Dimensions (WxHxD, mm) | 2U 438 x 87.5 x 815 |
---|---|
Motherboard | MAG4-GU0 |
CPU | Intel® Xeon® 6 Processors - Intel® Xeon® 6900-Series Processors Single processor, TDP up to 500W |
Socket | 1 x LGA 7529 Socket BR |
Chipset | System on Chip |
Memory | 12 x DIMM slots DDR5 memory supported 12-Channel memory architecture MRDIMM supported [1] RDIMM: Up to 6400 MT/s MRDIMM: Up to 8800 MT/s [1] MRDIMMs are only supported with Intel® Xeon® 6 Processors with P-cores. |
LAN | Rear: 1 x 10/100/1000 Mbps Management LAN |
Video | Integrated in Aspeed® AST2600 - 1 x Mini-DP |
Storage | Front hot-swap: 2 x 3.5"/2.5" Gen5 NVMe/SATA/SAS-4 [1] 10 x 3.5"/2.5" SATA/SAS-4 [1] Internal M.2: 1 x M.2 (2280/22110), PCIe Gen5 x2 1 x M.2 (2280/22110), PCIe Gen5 x2, disabled for SATA [1] SAS card is required to support SAS drives. |
SAS | Require SAS add-in cards |
RAID | Require RAID add-in cards Onboard VROC key header |
PCIe Expansion Slots | Riser Card CRC2023: - 2 x FHFL x16 (Gen5 x16), for GPUs Riser Card CRS202Q: - 1 x FHFL x16 (Gen5 x16), for GPUs Riser Card CRS201K: - 1 x FHFL x16 (Gen5 x16), for GPUs 1 x OCP NIC 3.0 (Gen5 x16) - Supports NCSI function |
Front I/O | 2 x USB 3.2 Gen1 ports (Type-A) 1 x Power button with LED 1 x ID button with LED 1 x NMI button 1 x Reset button 2 x LAN activity LEDs (disabled) 1 x Storage activity LED 1 x System status LED |
Rear I/O | 2 x USB 3.2 Gen1 ports (Type-A) 1 x Mini-DP 1 x MLAN port 1 x ID LED |
Backplane Board | Speed and bandwidth: Gen5 NVMe or SATA 6Gb/s or SAS-4 24Gb/s |
Security Modules | 1 x TPM header with SPI interface - Optional TPM2.0 kit: CTM012 1 x PRoT connector (only enabled on RoT SKU) |
Power Supply | 2 x 3200W 80 PLUS Titanium redundant power supply [1] AC Input: - 100-127V~/ 16A, 50-60Hz - 200-220V~/ 16A, 50-60Hz - 220-240V~/ 16A, 50-60Hz DC Input: (Only for China) - 240Vdc/ 16A DC Output: - Max 1300W/ 100-127V~ +12.2V/ 106.6A +12.2Vsb/ 3A - Max 3000W/ 200-220V~ +12.2V/ 246A +12.2Vsb/ 3A - Max 3200W/ 220-240V~ or 240Vdc Input +12.2V/ 262.3A +12.2Vsb/ 3A [1] The system power supply requires C19 power cord. [Note] GIGABYTE offers PSUs with various efficiency ratings and power outputs. Full redundancy may depend on your server configuration, and alternative PSU options may be needed. Please contact our sales representatives for the best power solution. |
System Management | Aspeed® AST2600 Baseboard Management Controller GIGABYTE Management Console web interface
|
OS Compatibility | Please refer to OS compatibility table in support page |
System Fans | 4 x 80x80x56mm (15,500rpm) |
Operating Properties | Operating temperature: 10°C to 30°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
Packaging Dimensions | 1077 x 679 x 300 mm |
Packaging Content | 1 x R264-AG0-AAS1 1 x CPU heatsink 1 x Mini-DP to D-Sub cable 1 x GPU power cable (12VHPWR, 250mm) 2 x GPU power cables (12VHPWR, 450mm) 1 x GPU power cable (12VHPWR, 550mm) 1 x Carrier 1 x 2-Section Rail kit |
Part Numbers | - Barebone package: 6NR264AG0DR000AAS1* - Motherboard: 9MAG4GU0UR-000* - 2-Section Rail kit (CMA not supported): 25HB2-3A0206-K0R - CPU heatsink: 25ST1-35310E-M1R - M.2 heatsink: 12SP2-11000E-00R - Front panel board - CFP2001: 9CFP2001NR-00* - Backplane board - CBP20C7: 9CBP20C7NR-00* - Fan module: 25ST2-885621-A0R - Riser card - CRC2023: 9CRC2023NR-00* - Riser card - CRS201K: 9CRS201KNR-00* - Riser card - CRS202Q: 9CRS202QNR-00* - Mini-DP to D-Sub cable: 25CRN-200801-K1R - GPU power cable (12VHPWR, 250mm): 25CRI-2503B3-Y4R - GPU power cable (12VHPWR, 450mm): 25CRI-4500B0-Y4R - GPU power cable (12VHPWR, 550mm): 25CRI-5500B1-Y4R - Power supply: 25EP0-232000-G1S Optional parts: - C19 power cord 125V/15A (US): 25CP1-018000-Q0R - C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R - C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R - 3-Section Rail kit (Supports CMA): 25HB2-A56121-K0R - Cable Management Arm: 25HB1-R18300-K0R |