H274-S61-LAW1
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | 2 |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 | ダイレクト液冷ソリューション
2U 4ノードリアアクセスサーバーシステム
デュアル インテル® Xeon® 6 プロセッサー（ノードあたり、LGA 4710
8チャネルDDR5 RDIMM / MCR DIMM、ノードあたり16 x DIMM
デュアルROMアーキテクチャ
Intel® I350-AM2経由1Gb/秒LANポート x 8
2.5 "Gen5NVMe/SATA/SAS-4ホットスワップベイ x 8
4 x M.2スロット（PCIe Gen4 x4インターフェイス）（オプション
4 x LP PCIe Gen5 x16スロット
4 x OCP NIC 3.0 PCIe Gen5 x16スロット
デュアル3000W 80 PLUS Titaniumリダンダント電源 |
Intel® Xeon® 6 プロセッサー搭載サーバーのご紹介
製品仕様
| Dimensions (WxHxD, mm) | 2U 4-Node - Rear access 440 x 87.5 x 877 |
|---|---|
| Motherboard | MS64-HD0 |
| CPU | Intel® Xeon® 6 Processors - Intel® Xeon® 6700E-Series Processors - Intel® Xeon® 6700P-Series Processors (available Q1'25) - Intel® Xeon® 6500P-Series Processors (available Q1'25) Dual processor per node, TDP up to 350W Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable. |
| Socket | Per Node: 2 x LGA 4710 Total: 8 x LGA 4710 Socket E2 |
| Chipset | System on Chip |
| Memory | Per node: 16 x DIMM slots Total: 64 x DIMM slots DDR5 memory supported MCR DIMM supported* 8-Channel memory architecture RDIMM: Up to 6400 MT/s MCR DIMM: Up to 8000 MT/s *MCR DIMMs are only supported with Intel® Xeon® 6 Processors with P-cores. |
| LAN | Per node: On I/O board: - 2 x 1Gb/s LAN ports (1 x Intel® I350-AM2) - Support NCSI function - 1 x 10/100/1000 Mbps Management LAN Total: On I/O boards: - 8 x 1Gb/s LAN ports (4 x Intel® I350-AM2) - Support NCSI function - 4 x 10/100/1000 Mbps Management LAN Note: Spanning Tree Protocol (STP) must be enabled on LAN switches when using a ring topology. |
| Video | Integrated in Aspeed® AST2600 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp Management chip on CMC board: Integrated in Aspeed® AST2620 |
| Storage | Per node: 2 x 2.5" Gen5 NVMe/SATA/SAS-4* hot-swappable bays - (NVMe & SATA from CPU_1) Total: 8 x 2.5" Gen5 NVMe/SATA/SAS-4* hot-swappable bays - (NVMe & SATA from CPU_1) *SAS card is required to support SAS drives. |
| SAS | Require SAS add-in cards |
| RAID | Require RAID add-in cards |
| Expansion Slots | Per node: Riser Card CRSH01R: - 1 x PCIe x16 (Gen5 x16) low-profile slot, from CPU_0 1 x OCP 3.0 slot with PCIe Gen5 x16 bandwidth, from CPU_0 Supports NCSI function Optional 1 x M.2 slot (CMTP160): - M-key - PCIe Gen4 x4, from CPU_1 - Supports 2260/2280/22110 cards Total: Riser Card CRSH01R x 4: - 4 x PCIe x16 (Gen5 x16) low-profile slots, from CPU_0 4 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth, from CPU_0 Support NCSI function Optional 4 x M.2 slots (CMTP160): - M-key - PCIe Gen4 x4, from CPU_1 - Supports 2260/2280/22110 cards |
| Internal I/O | Per node: 1 x TPM header 1 x PRoT connector 1 x VROC connector |
| Front I/O | Per node: 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x System status LED Total: 4 x Power buttons with LED 4 x ID buttons with LED 4 x Reset buttons 4 x System status LEDs *1 x CMC status LED *1 x CMC reset button *Only one CMC status LED and reset button per system. |
| Rear I/O | Per node: 2 x USB 3.2 Gen1 1 x Mini-DP 2 x RJ45 1 x MLAN 1 x System status LED Total: 8 x USB 3.2 Gen1 4 x Mini-DP 8 x RJ45 4 x MLAN 4 x System status LEDs |
| Backplane Board | Speed and bandwidth: PCIe Gen5 x4 or SATA 6Gb/s or SAS-4 24Gb/s |
| Security Modules | 1 x TPM header with SPI interface per node - Optional TPM2.0 kit: CTM012 1 x PRoT module connector (M.2 M-key) per node - Optional PRoT module (AST1060 solution): CSC1200 |
| Power Supply | Dual 3000W 80 PLUS Titanium redundant power supply AC Input: - 100-127V~/ 16A, 50/60Hz - 200-207V~/ 16A, 50/60Hz - 208-240V~/ 16A, 50/60Hz DC Input: (Only for China) - 240Vdc/ 16A DC Output: - Max 1200W/ 100-127V~ +12.2V/ 98.36A +12.2Vsb/ 3A - Max 2600W/ 200-207V~ +12.2V/ 213A +12.2Vsb/ 3A - Max 3000W/ 208-240V~ or 240Vdc Input +12.2V/ 245.9A +12.2Vsb/ 3A Note: The system power supply requires C19 power cord. |
| System Management | Aspeed® AST2600 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
| OS Compatibility | Please refer to OS compatibility table in support page |
| System Fans | TBD |
| Operating Properties | Operating temperature: 10°C to 40°C Operating humidity: 8-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) Note: 1) The ambient temperature and relative humidity of the environment depend on the inlet supply water temperature and the coolant flow rate. 2) If the relative humidity surpasses 60%, maintain the inlet water temperature between 40°C and 45°C to prevent condensation and ensure optimal system performance. |
| Packaging Dimensions | TBD |
| Packaging Content | 1 x H274-S61-LAW1 8 x CoolIT CPU cold plate loops 16 x Carriers 1 x 3-Section Rail kit |
| Part Numbers | - Barebone w/ cold plates: 6NH274S61DR000LAW1* - Barebone w/o cold plates: 6NH274S61DZ000LAW1* - Motherboard: 9MS64HD0UR-000 - 3-Section Rail kit: 25HB2-A66125-K0R - CoolIT CPU cold plate loop: TBD - Front panel board - CFPH004: 9CFPH004NR-00 - Backplane board - CBPH081: 9CBPH081NR-00 - Fan module: TBD - Riser card - CRSH01R: 9CRSH01RNR-00 - I/O board - CLBH160: 9CLBH160NR-00 - Power supply: 25EP0-23000L-L0S Optional parts: - C19 power cord 125V/15A (US): 25CP1-018000-Q0R - C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R - C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R - M.2 riser card - CMTP160: 9CMTP160NR-00 - Ring topology kit (10-kit package): TBD - CoolIT leak sensor board: TBD (QPA:4) |
