サーバー NEW

    H263-S62 (rev. AAN1)

    2U Xeon CPU Max第4世代 Xeon Scalable リダンダント電源 マルチノード

    • 第4世代 Intel Xeon スケーラブル 2U4node高密度実装サーバー
    • ・2U 4 ノード背面アクセス サーバー
    • ・第4 世代 Intel ® Xeon ®スケーラブル プロセッサ
    • ・Intel® Xeon® CPU Maxシリーズ
    • ・2CPU、LGA4677
    • ・8 チャネル RDIMM DDR5、64 x DIMM(per processor)
    • ・Intel ® Optane™ Persistent Memory 300シリーズをサポート
    • ・Dual ROM アーキテクチャをサポート
    • ・4 x 専用管理ポート
    • ・1 x CMC グローバル管理ポート
    • ・24 x 2.5インチ Gen4 NVMe/SATA ホットスワップ対応
    • ・4 x M.2 (with PCIe Gen4 x4 interface) (オプション)
    • ・8 x Low Profile PCIe Gen5 x16 拡張スロット
    • ・4 x OCP 3.0 Gen5 x16 mezzanine slots
    • ・2 x 2600W (240V) 80 PLUS Titanium リダンダント電源

    製品仕様

    Dimensions (WxHxD, mm)2U 4-Node - Rear access
    440 x 87.5 x 840
    MotherboardMS63-HD1
    CPU 
    SocketPer Node:
    2 x LGA 4677
    Total:
    8 x LGA 4677

    Socket E
    Chipset 
    MemoryPer node:
    16 x DIMM slots

    Total:
    64 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 128GB supported
    3DS RDIMM modules up to 256GB supported
    Memory speed: Up to 4800 MHz
    LANPer node:
    1 x Dedicated management port

    Total:
    4 x Dedicated management ports
    Video 
    AudioN/A
    StoragePer node:
    6 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays

    Total:
    24 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays

    SAS card is required for SAS devices support
    SASSupported via add-on SAS Card
    RAID 
    Peripheral DrivesN/A
    Expansion SlotsPer node:
    2 x Low profile half-length slots with PCIe x16 (Gen5 x16 bus), from CPU_0
    1 x OCP 3.0 mezzanine slot with PCIe Gen5 x16 bandwidth, from CPU_0
    Supported NCSI function

    *1 x M.2 slot from CPU_1:
    - M-key
    - PCIe Gen4 x4
    - Supports NGFF-2280/22110 cards

    Total:
    8 x Low profile half-length slots with PCIe x16 (Gen5 x16 bus), from CPU_0
    4 x OCP 3.0 mezzanine slots with PCIe Gen5 x16 bandwidth, from CPU_0
    Supported NCSI function

    *4 x M.2 slots from CPU_1:
    - M-key
    - PCIe Gen4 x4
    - Supports NGFF-2280/22110 cards

    *Optional kit for M.2 extension riser card
    PN: 9CMTP061NR-00
    Internal I/OPer node:
    1 x TPM header
    Front I/OPer node:
    1 x Power button with LED
    1 x ID button with LED
    1 x Status LED
    1 x System reset button

    Total:
    4 x Power button with LED
    4 x ID button with LED
    4 x Status LED
    4 x System reset button
    *1 x CMC status LED
    *1 x CMC reset button

    *Only one CMC status LED and reset button per system
    Rear I/OPer node:
    2 x USB 3.2 Gen1
    1 x VGA
    1 x RJ45 MLAN
    1 x ID button with LED

    Total:
    8 x USB 3.2 Gen1
    4 x VGA
    4 x RJ45 MLAN
    4 x ID button with LED
    *1 x CMC global management port

    *Only one CMC global management port per system
    Backplane I/OBackplane P/N: 9CBPH7O1NR-00
    PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s
    TPM1 x TPM header with SPI interface
    Optional TPM2.0 kit: CTM010
    Power SupplyDual 2600W (240V) 80 PLUS Titanium redundant power supply
    Available for 2+1 redundant power supply configuration (optional)

    AC Input:
    - 100-127V~/ 13.8A, 50-60Hz
    - 200-240V~/ 15A, 50-60Hz

    DC Input:
    - 240Vdc/ 15A

    DC Output:
    - Max 1000W/ 100-127V~
    + 12.2V/ 81A
    + 12.2Vsb/ 4.5A
    - Max 2600W/ 200-220V~
    + 12.2V/ 213A
    + 12Vsb/ 4.5A

    NOTE: The system power supply requires C19 type power cord
    System Management 
    OS CompatibilityPlease refer to OS compatibility table in support page
    System Fans8 x 80x80x38mm (18,300rpm)
    Operating Properties 
    Packaging Dimensions1180 x 779 x 300 mm
    Packaging Content1 x H263-S62
    8 x CPU heatsinks
    24 x Carrier clips
    1 x Rail Kit
    Part Numbers- Barebone package: 6NH263S62DR000AAN1*
    - Motherboard: 9MS63HD1UR-000
    - Rail kit: 25HB2-A66125-K0R
    - CPU heatsink: 25ST1-453207-C1R/25ST1-453208-C1R
    - M.2 extension riser card: 9CMTP061NR-00 (optional)
    - Riser card ( from CPU_1): 9CRSH310NR-00 (optional)
    - Back plane board: 9CBPH7O1NR-00
    - Fan module: 25ST2-88382P-S1R/25ST2-88382Q-S1R
    - Riser card - CRSH01T: 9CRSH01TNR-00
    - Riser card - CRSH01U: 9CRSH01UNR-00
    - Ring topology kit: 6NH263S62S1000AAN11 (optional, QPA:1)
    - Power Supply: 25EP0-226000-G1S
    - C19 power cord 125V/15A (US): 25CP1-018000-Q0R (optional)
    - C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R (optional)

    ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!

    1. お問い合わせ

      まずは、お電話またはお問い合わせフォームよりご連絡ください。
      ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。

      以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
      ・CPU (コア数,クロック数)
      ・メモリ (容量)
      ・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
      ・OS
      ・GPU等拡張カードの有無
      ・I/Oポート仕様
      ・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
      ・希望納期

      お問い合わせ先
      Tel:03-3815-9001
      URL:https://www.sunwaytech.co.jp/contact/

    2. ご提案・お見積り

      お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
      技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。

    3. ご注文

      お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
      ご注文後、正式な納期や手配状況をご案内いたします。

    4. 入荷検査・キッティング

      海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
      ご要望に応じて、初期設定やOSのインストールなども承ります。

    5. 納品

      ご指定の場所へサーバーを発送いたします。
      納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。

    6. アフターサポート

      納品後も安心してご利用いただけるよう、サポート体制を整えております。
      ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。

      サポート窓口
      Tel:03-3815-9001
      URL:https://member.sunwaytech.co.jp/login

      安心・確実なサーバー導入をサポートいたします!
      まずはお気軽にお問い合わせください。

    複数条件から探す

    メーカー、筐体サイズ、仕様(CPU、CPUソケット数、最大GPU数)、特長・用途などから製品を探せます。

    キーワードから探す

    CLOSE

    サーバー・産業用PCに関するご相談・お見積りなど
    お気軽にお問い合わせをください。

    03-3815-9001 受付時間/平日9:30 〜 18:00