製品仕様
| Product SKUs | |
|---|---|
| MBD-X12SCZ-QF | X12SCZ-QF |
| Physical Stats | |
| Form Factor | microATX |
| Dimensions | 9.6"" x 9.6"" (24.38cm x 24.38cm) |
| Processor/Cache | |
| CPU | 10th Generation Intel® Core i9/Core i7/Corei5/Corei3/Pentium®/Celeron® Processor Single Socket LGA-1200 (Socket H5) supported, CPU TDP support Up to 125W TDP A graphic integrated CPU is required to have onboard video from the DVI and DP ports |
| Cores / Cache | Up to 10 cores |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| System Memory | |
| Memory Capacity | Up to 128GB Unbuffered non-ECC UDIMM, DDR4-2933MHz, in 4 DIMM slots |
| Memory Type | 2933/2666/2400/2133MHz |
| DIMM Sizes | 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.2V |
| On-Board Devices | |
| Chipset | Intel® Q470 |
| SATA | Intel® Q470 controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| IPMI | ASPEED AST2500 BMC |
| Network Controllers | Single LAN with Intel® PHY I219LM LAN controllerSingle LAN with Intel® Ethernet Controller I210-AT |
| Audio | ALC 888S HD Audio |
| Graphics | Aspeed AST2500 BMC, Intel® HD Graphics |
| Input / Output | |
| SATA | 4 SATA3 (6Gbps) ports |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports |
| USB | 6 USB 2.0 ports (6 via headers) 6 USB 3.1 Gen2 ports (4 Rears Type A, 2 via headers) 6 USB 3.2 Gen2 ports (4 Rear Type A, 2 via headers) |
| Video Output | 1 VGA D-Sub Connector port, 2 DP++(Dual-Mode DisplayPort) ports, 1 DVI - D port |
| Serial Port / Header | 2 COM Ports (1 header) |
| TPM | TPM Header & Chip both |
| Expansion Slots | |
| PCI-E | 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x4 (in x8 slot), 1 PCI-E 3.0 x4 |
| M.2 | 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2280/22110 1 M.2 E-Key CNVi/PCI-E 3.0 x1, 2230 |
| System BIOS | |
| BIOS Type | AMI UEFI |
| BIOS Features | ACPI 6.1 SMBIOS 3.1 PCI FW 3.0 UEFI 2.6 RTC (Real Time Clock) Wakeup |
| Management | |
| Software | AMT, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, SUM, SuperDoctor® 5, vPro, Watchdog |
| System Management Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Power Configurations | +12V DC Power Input ATX Power connector ACPI Power Management |
| PC Health Monitoring | |
| Voltage | +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 5 -fan status, Chassis intrusion header, CPU, Memory, VBAT |
| FAN | 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control |
| Temperature | Thermal Control for 5 Fan Connectors |
| LED | Power LED, BMC/IPMI Heartbeat LED, UID/Remote UID |
| Other Features | 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion header, Dual Cooling Zones, M.2 NGFF connector, RoHS, UID |
| Operating Environment | |
| Operating Temperature Range | 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range | -40°C - 85°C (-40°F - 185°F) |
| Operating Relative Humidity Range | 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
