サーバー

    R281-Z91 (rev. A00)

    2U EPYC 7002 リダンダント電源 ストレージサーバー

    製品仕様

    Dimensions (WxHxD, mm)2U
    438 x 87 x 710
    MotherboardMZ91-FS0
    CPU 
    ChipsetSystem on Chip
    Memory32 x DIMM slots
    DDR4 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 64GB supported
    LRDIMM modules up to 128GB supported
    Memory speed: Up to 3200*/ 2933 MHz

    - Note:
    * Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
    LAN 
    Video 
    Audio-
    StorageFront side: 6 x 2.5" U.2, 18 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
    Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
    LSI SAS35x36 expander
    Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
    Default configuration supports:
    6 x U.2, 0 x SAS/SATA drives
    SAS card is required to enable the drive bays
    RAIDFor SAS/SATA supported only
    Depends on RAID card
    Peripheral Drives-
    Expansion SlotsRiser Card CRS2133:
    - 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
    - 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
    - 1 x PCIe x8 slots (Gen3 x8), Full height half-length

    Riser Card CRS2134:
    - 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
    - 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
    - 1 x PCIe x8 slots (Gen3 x8), Full height half-length, Occupied by CNV3122, 2 x U.2 ports

    Riser Card CRS2124:
    - 1 x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length
    - 1 x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length

    2 x OCP mezzanine slots
    - PCIe Gen3 x16
    - Type1, P1, P2, P3, P4, K2, K3

    1 x M.2 slot:
    - M-key
    - PCIe Gen3 x4
    - Supports NGFF-2242/2260/2280 cards
    Internal I/O6 x SlimSAS connectors
    1 x M.2 slot
    2 x CPU fan headers
    1 x USB 3.0 header
    1 x TPM header
    7 x PCIe expansion slots
    2 x OCP mezzanine slots
    2 x Power supply connectors
    1 x Front panel header
    1 x Back plane board header
    1 x IPMB connector
    1 x Clear CMOS jumper
    1 x BIOS recovery jumper
    Front I/O2 x USB 3.0
    1 x Power button with LED
    1 x ID button with LED
    1 x Reset button
    1 x NMI button
    1 x System status LED
    1 x HDD activity LED
    2 x LAN activity LEDs
    Rear I/O2 x USB 3.0
    1 x VGA
    1 x COM (RJ45 type)
    2 x RJ45
    1 x MLAN
    1 x ID button with LED
    Backplane I/OFront side_CBP20O5: 18 x SATA/SAS and 6 x NVMe ports
    Rear side_CBP2020: 2 x SATA/SAS ports (connected to SAS expander)
    Front side_CEP26O0: 18 x SATA/SAS expander
    TPM1 x TPM header with LPC interface
    Optional TPM2.0 kit: CTM000
    Power Supply2 x 1200W redundant PSUs
    80 PLUS Platinum

    AC Input:
    - 100-240V~/ 12-7A, 50-60Hz
    DC Input:
    - 240Vdc/ 6A

    DC Output:
    - Max 1000W/ 100-240V~
    +12V/ 80.5A
    +12Vsb/ 3A
    - Max 1200W/ 200-240V~ or 240Vdc input
    +12V/ 97A
    +12Vsb/ 3A
    System Management 
    OS Compatibility 
    Weight22 kg
    System Fans4 x 80x80x38mm (16
    Operating Properties 
    Packaging Dimensions982 x 588 x 268 mm
    Packaging Content1 x R281-Z91
    2 x CPU heatsinks
    1 x Rail kit
    Part NumbersBarebone package: 6NR281Z91MR-00-A*
    Part Numbers:
    - Motherboard: 9MZ91FS0NR-00-2*
    - Rail kit: 25HB2-3A0202-K0R
    - CPU heatsink: 25ST1-15320E-J1R
    - Back plane board_24-port: 9CBP20O5NR-00
    - Back plane board_2-port: 9CBP2020NR-00
    - Back plane board_U.2 type: 9CEP26O0NR-00
    - Front panel board: 9CFP2001NR-00
    - Power supply: 25EP0-212007-F3S
    - RJ45 type COM cable: 25CR0-200400-Y4R (in option)
    - Riser card - CRS2133: 9CRS2133NR-00
    - Riser card - CRS2134: 9CRS2134NR-00
    - Riser card - CRS2124: 9CRS2124NR-00

    ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!

    1. お問い合わせ

      まずは、お電話またはお問い合わせフォームよりご連絡ください。
      ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。

      以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
      ・CPU (コア数,クロック数)
      ・メモリ (容量)
      ・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
      ・OS
      ・GPU等拡張カードの有無
      ・I/Oポート仕様
      ・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
      ・希望納期

      お問い合わせ先
      Tel:03-3815-9001
      URL:https://www.sunwaytech.co.jp/contact/

    2. ご提案・お見積り

      お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
      技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。

    3. ご注文

      お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
      ご注文後、正式な納期や手配状況をご案内いたします。

    4. 入荷検査・キッティング

      海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
      ご要望に応じて、初期設定やOSのインストールなども承ります。

    5. 納品

      ご指定の場所へサーバーを発送いたします。
      納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。

    6. アフターサポート

      納品後も安心してご利用いただけるよう、サポート体制を整えております。
      ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。

      サポート窓口
      Tel:03-3815-9001
      URL:https://member.sunwaytech.co.jp/login

      安心・確実なサーバー導入をサポートいたします!
      まずはお気軽にお問い合わせください。

    複数条件から探す

    メーカー、筐体サイズ、仕様(CPU、CPUソケット数、最大GPU数)、特長・用途などから製品を探せます。

    キーワードから探す

    CLOSE

    サーバー・産業用PCに関するご相談・お見積りなど
    お気軽にお問い合わせをください。

    03-3815-9001 受付時間/平日9:30 〜 18:00