製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X9DRFF-7TG+ -B | X9DRFF-7TG+ (Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 8.54″ x 18.72″ (21.7cm x 47.5cm) |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP **) Dual Socket R (LGA 2011) |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| Note | † BIOS version 3.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| System Memory | |
| Memory Capacity | 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602 chipset |
| AHCI SATA | SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 |
| SAS | SAS2 (6Gb/s) via Broadcom 2308 SW RAID 0, 1, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) |
| Video | Matrox G200eW |
| Input / Output | |
| AHCI SATA | 2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s) |
| SAS | 8 SAS2 ports (6Gb/s) |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 3 USB 2.0 ports (2 rear + 1 Type A) |
| Video | 1 VGA port |
| DOM | 1 DOM (Disk on Module) power connector |
| TPM | 1 TPM Header |
| Chassis (Optimized for X9DRFF-7TG+ ) | |
| 1U Chassis | CSE-816LT-655B |
| Tower / 4U Rackmount | CSE-F414IS-R1K62BP CSE-F424AG-R1K62BP CSE-F424BG-R1K62BP |
| Important Chassis Notes | This motherboard is designed only for FatTwin™ chassis |
| SuperServer(s) with X9DRFF-7TG+ | |
| Model(s) | SYS-F627G2-F73PT+ SYS-F627G3-F73PT+ SYS-F617H6-FTPTL+ |
| Expansion Slots | |
| PCI-Express | 1 PCI-E 3.0 x16 slot (requires riser card) 2 PCI-E 3.0 x8 slots 1 PCI-E 2.0 x4 (in x8) slot Riser card support: PCI-E 3.0 x32 (rear)(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management | |
| Software | SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 |
| Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.1V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | 8x 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI |
| LED | Suspend Static indicator LED UID/Remote UID |
| Other Features | RoHS |
| Operating Environment | |
| Operating Temperature Range | 10°C – 35°C (50°F – 95°F) |
| Non-Operating Temperature Range | -40°C – 70°C (-40°F – 158°F) |
| Operating Relative Humidity Range | 8% – 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% – 95% (non-condensing) |
キーワードから探す
CLOSE
