製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X9DR7-TF+ -O | X9DR7-TF+ (Standard Retail Pack) |
| MBD-X9DR7-TF+ -B | X9DR7-TF+ (Bulk Pack) |
| Physical Stats | |
| Form Factor | Enhanced E-ATX |
| Dimensions | 13.68" x 13" (34.7cm x 33cm) |
| Processor/Cache | |
| CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP **) |
| Note | † BIOS version 3.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| System Memory | |
| Memory Capacity | 24x 240-pin DDR3 DIMM slots Up to 1.5TB DDR3 ECC LRDIMM Up to 768GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602J chipset |
| SATA | SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 |
| SAS | SAS2 from Broadcom 2208 (1GB cache) HW RAID 0, 1, 5, 6, 10, 50, 60 support Supports up to 16 devices as default, more HDD devices support is also available as an option ** For special sku, please contact your Supermicro Sales. |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video | G200 (Nuvoton WPCM450 BMC with graphic controller) |
| Super I/O | Nuvoton W83527HG |
| Input / Output | |
| SATA | 2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s) |
| SAS | 8 SAS2 ports (6Gb/s) |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 9 USB 2.0 ports total(4 rear + 4 via header + 1 Type A) |
| Video | 1 VGA port |
| Keyboard/Mouse | PS/2 Keyboard/Mouse port |
| Serial Port / Header | 2 Fast UART 16550 ports: 1 rear and 1 header |
| DOM | 1 DOM (Disk on Module) power connector |
| TPM | 1 TPM Header |
| Chassis (Optimized for X9DR7-TF+ ) | |
| 2U Chassis | CSE-826BA-R1K28LPB CSE-826BA-R920LPB CSE-826BE16-R1K28LPB CSE-826BE16-R920LPB CSE-826BE26-R1K28LPB CSE-826BE26-R920LPB CSE-828TQ-R1K43LPB |
| 3U Chassis | CSE-835BTQ-R1K28B CSE-835TQ-R920B CSE-836BA-R1K28B CSE-836BE16-R1K28B CSE-836BE26-R1K28B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. |
| SuperServer(s) with X9DR7-TF+ | |
| Model(s) | |
| Expansion Slots | |
| PCI-Express | 2 (x16) PCI-E 3.0 slots 4 (x8) PCI-E 3.0 slots(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III Watch Dog NMI Optional IPMI 1.5 / 2.0 |
| Power Configurations | ACPI / APM Power Management Main Switch Override Mechanism CPU Fan auto-off in sleep mode Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5 Phase-switching voltage regulator |
| FAN | 9x 4-pin fan headers (up to 9 fans) 9x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 9x Fan Connectors I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support |
| Operating Environment | |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
