製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X9DRL-iF -O | X9DRL-iF (Standard Retail Pack) |
| MBD-X9DRL-iF -B | X9DRL-iF (Bulk Pack) |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 12" x 10" (30.48cm x 25.4cm) |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP **) Dual Socket R (LGA 2011) |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| Note | † BIOS version 3.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| System Memory | |
| Memory Capacity | 8x 240-pin DDR3 DIMM slots Up to 512GB DDR3 ECC LRDIMM Up to 256GB DDR3 ECC RDIMM Up to 64GB DDR3 ECC/non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602 chipset |
| SATA | SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 |
| AHCI SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10 |
| SCU SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 |
| SAS | SAS from C606 RAID 0,1,5,6,10,50,60 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® 82574L Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video | Matrox G200eW |
| Input / Output | |
| SATA | 2x SATA 3.0 ports (6Gb/s) 8x SATA 2.0 ports (3Gb/s) |
| AHCI SATA | 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) |
| SCU SATA | 4x SATA 2.0 ports (3Gbps) |
| SAS | 8x SAS2 ports (6Gb/s) |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 9 USB 2.0 ports total(4 rear + 4 via header + 1 Type A) |
| Video | 1 VGA port |
| Serial Port / Header | 2 Fast UART 16550 port / 1 Header |
| DOM | 1 DOM (Disk on Module) power connector |
| TPM | 1 TPM Header |
| Chassis (Optimized for X9DRL-iF ) | |
| 2U Chassis | CSE-823TQ-650B CSE-826TQ-653B |
| 3U Chassis | CSE-833T-653B |
| Mid-Tower | CSE-732i-500B |
| Tower / 4U Rackmount | CSE-842TQ-665B CSE-842TQ-865B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. Do not support in 1U chassis |
| Expansion Slots | |
| PCI-Express | 3 PCI-E 3.0 x8 1 PCI-E 2.0 x4 (in x8) 1 PCI-E 2.0 x1 1 PCI |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management | |
| Software | SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 |
| Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | 8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free Dual Cooling Zones |
| Operating Environment | |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
