製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X9DRW-CF31 -O | X9DRW-CF31 (Standard Retail Pack) |
| MBD-X9DRW-CF31 -B | X9DRW-CF31 (Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary WIO |
| Dimensions | 12.3" x 13" (31.2cm x 33.0cm) |
| Processor/Cache | |
| CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP **) |
| Note | † BIOS version 3.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| System Memory | |
| Memory Capacity | 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602J chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 SATA2 (3Gbps) with RAID 0, 1, 5, 10 |
| SAS | SAS3 support via AOM w/ Broadcom 3108 HW RAID 0, 1, 5, 6, 10, 50, 60 support Supports up to 16 devices as default, more HDD devices support is also available as an option ** For special sku, please contact your Supermicro Sales. |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Video | G200 (Nuvoton WPCM450 BMC) |
| Input / Output | |
| SATA | 2x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports |
| SAS | 8x SAS 3.0 (12Gbps) ports |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 4x USB 2.0 ports total (4 rear) |
| Video | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 header |
| DOM | 1x DOM (Disk on Module) power connector |
| TPM | 1x TPM Header |
| Chassis (Optimized for X9DRW-CF31 ) | |
| 1U Chassis | CSE-116AC-R700WB |
| 2U Chassis | CSE-216BE1C-R920WB CSE-216BE2C-R920WB |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. |
| SuperServer(s) with X9DRW-CF31 | |
| Model(s) | SYS-1027R-WC1R |
| Expansion Slots | |
| PCI-Express | 1 (x32) PCI-E 3.0 (left riser slot) 1 (x16) PCI-E 3.0 (right riser slot) 1 (x16) PCI-E 3.0 (HBA Mezzanine slot) |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 BIOS rescue hot keys USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management | |
| Software | SuperDoctor® 5 Watch Dog NMI IPMI 1.5 / 2.0 Intel Node Manager |
| Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +12V Standby, +3.3V Standby, VBAT, Memory Voltages. 6+1 Phase-switching voltage regulator |
| FAN | 6x 4-pin fan headers 6x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED indicator Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support RoHS Dual cooling zones |
| Operating Environment | |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
