製品仕様
| Product SKUs | |
|---|---|
| MBD-X9SRH-7TF -B | X9SRH-7TF (Bulk Pack) |
| Physical Stats | |
| Form Factor | |
| Dimensions | |
| Processor/Cache | |
| CPU | Single Socket R (LGA 2011) Intel® Xeon® processor E5-2600/1600 and E5-2600/1600 v2 family† (up to 12 cores and up to 135W) |
| Note | † BIOS version 3.0 or above is required† E5-1600 series CPU does not support LRDIMM type memory |
| System Memory | |
| Memory Capacity | 8x 240-pin DDR3 DIMM slots Up to 512GB DDR3 ECC LRDIMM Up to 256GB DDR3 ECC RDIMM Up to 64GB DDR3 ECC/non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel C602J chipset (7 Years Long Life) |
| SATA | SATA3 (6Gb/s) and SATA2 (3Gb/s) RAID 0, 1, 5, 10 |
| SAS | SAS2 (6Gb/s) via Broadcom 2308 SW RAID 0, 1, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450RA0BX Intel Node Manager support |
| Network Controllers | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video | Matrox G200eW 16MB DDR2 graphics |
| Super I/O | Nuvoton NCT 6776F |
| Input / Output | |
| SATA | 2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s) |
| SAS | 8 SAS2 ports (6Gb/s) |
| LAN | 2 RJ45 10GbE LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 9 USB 2.0 ports total (2 rear + 6 via header + 1 Type A) |
| Video | 1 VGA port |
| Keyboard/Mouse | 2 PS/2 Keyboard/Mouse ports |
| Serial Port / Header | 2 serial ports (1 rear, 1 header) |
| DOM | 1 DOM (Disk on Module) power connector |
| TPM | 1 TPM Header |
| Chassis ( Optimized for X9SRH-7TF ) | |
| 1U Chassis | CSE-113MTQ-330CB CSE-813MTQ-350C CSE-813MTQ-R400CB |
| 2U Chassis | CSE-823TQ-653LPB CSE-826E16-R500LPB CSE-826TQ-R500LPB |
| 3U Chassis | CSE-833T-650B CSE-833T-653B CSE-836E16-R500B CSE-836TQ-R500B |
| Tower / 4U Rackmount | CSE-842TQ-665B CSE-842TQ-865B |
| Important Chassis Notes | To support motherboards based on Intel® Xeon® processor 5500/3500 series, Revision K or later chassis is recommended for most models. Please talk to your sales representative for details. |
| Expansion Slots | |
| PCI-Express | 1x PCI-E 3.0 x16 slot 1x PCI-E 3.0 x8 (in x16) slot 1x PCI-E 2.0 x4 (in x8) slot |
| PCI | 2x PCI-32 slots |
| System BIOS | |
| BIOS Type | 64Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7.1 UEFI 2.3.1 RTC (Real Time Clock) Wakeup |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI / APM Power Management Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | Five 4-pin fan headers supporting up to 5 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header Chipkill support RoHS, Halogen Free |
キーワードから探す
CLOSE
