製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7DBN-O | X7DBN (Standard Retail Pack) |
| MBD-X7DBN-B | X7DBN (Bulk Pack) |
| Physical Stats | |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13" (30.5cm x 33.2cm) |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
| System Memory | |
| Memory Capacity | Eight 240-pin DIMM sockets Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported |
| Memory Type | 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.8V only 1.5V (AMB) |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 5000P (Blackford) chipset MCH + ESB2 |
| SATA | Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP-B(+)) (Optional: AOC-SIMLP-3(+)) with 3rd LAN support |
| Network Controllers | Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Expansion Slots | |
| Universal I/O | 1 Universal (UIO) slot Used in conjunction with Supermicro UIO Controller Card |
| PCI-Express | 2 (x8) PCI-e slots 1 (x4) PCI-e (using x8) slot |
| PCI-X | 2x 64-bit 100MHz PCI-X (3.3V) slots |
| PCI | 1x 32-bit PCI slot |
| Input / Output | |
| IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 3x USB internal headers Total 5 USB 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header |
| Parallel Port | 1 ECP / EEP parallel port |
| Chassis ( Optimized for X7DBN ) | |
| 2U Chassis | CSE-825TQ-560LPV CSE-825TQ-R700LPV CSE-825TQ-560RCV CSE-825TQ-R700RCV CSE-823i-550LP CSE-823T-550LP |
| 3U Chassis | CSE-833T-550 (SIMLC Support only) CSE-833T-R760 (SIMLC Support only) |
| Tower / 4U Rackmount | CSE-745TQ-R800 CSE-743i-645 CSE-743T-645 CSE-743i-650 CSE-743T-650 CSE-743i-R760 CSE-743T-R760 CSE-743TQ-R760 |
| Important Chassis Notes | To ensure system stability, a 550W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| System BIOS | |
| BIOS Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features | Plug and Play (PnP) SMBIOS 2.3 DMI 2.13 PCI 2.2 ACPI 1.0 USB Keyboard support |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem remote ring-on |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
