製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7DBP-8-B | X7DBP-8 (Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 16.24" Length x 11.23" Width (41.25cm x 28.52cm) |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
| System Memory | |
| Memory Capacity | Eight 240-pin DIMM sockets Supports up to 32 GB 667/533MHz FB-DIMM memory Dual branch memory bus Memory must be populated in pairs |
| Memory Type | 667/533MHz FB-DIMM (Fully Buffered DIMM) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.8V only 1.5V(AMB) |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 5000P (Blackford) chipset MCH + PXH + ESB2 |
| SATA | ESB2 SATA Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| SCSI | Adaptec AIC-7902 Controller Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives) Host RAID 0, 1, 10 support |
| RAID | Support for Zero-Channel RAID RAID 0, 1, 5, 10 Optional: (Card NOT included) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIM1U-3B(+) and AOC-SIM1U-3D) |
| Network Controllers | Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK410B chip |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel support up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN port |
| USB | 2x USB rear ports 2x USB internal headers, 1 dual, 1 single USB 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2 Fast UART 16550 serial ports |
| Chassis ( Optimized for X7DBP-8 ) | |
| 1U Chassis | CSE-816S-R700 CSE-816S-700 |
| Important Chassis Notes | To ensure system stability, a 500W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots | |
| Left Universal Slot | 1 (x8) PCI-e slot OR 1x 64-bit 100MHz PCI-X (3.3V) slot |
| Right Universal Slot | 1 (x8) PCI-e slot OR 1x 64-bit 133MHz PCI-X (3.3V) slot |
| IPMI | 1 SIM1U Slot (IPMI 2.0)(Supermicro Intelligent Management) |
| System BIOS | |
| BIOS Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features | Plug and Play (PnP) SMBIOS 2.3 APM 1.2 DMI 2.3 PCI 2.2 ACPI 1.0 ACPI 1.0 (limited) USB Keyboard support Hardware BIOS Virus protection |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5 - with Virtual Media 8 Optional KVM over LAN & 3rd LAN Port SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal/External modem remote ring-on |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby, VBAT CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V |
| FAN | Total of ten proprietary fan headers for up to ten fans Ten fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors I2C temperature sensing logic Thermal Monitor 2 (TM2) support |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
