製品仕様
| Product SKUs | |
|---|---|
| MBD-X10SLA-F | X10SLA-F |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 12" x 9.6" (30.48cm x 24.38cm) |
| Processor/Cache | |
| CPU | Intel® 4th Generation Core i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series. Single Socket LGA 1150 supported, CPU TDP support 85W |
| System Memory | |
| Memory Capacity | Up to 32GB Unbuffered ECC UDIMM, in 4 DIMM slots 4x 240-pin DDR3 DIMM sockets |
| Memory Type | 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C222 Express PCH |
| SATA | SATA3 (6 Gbps) ports; RAID 0,1 SATA2 (3 Gbps) ports; RAID 0,1,5,10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Dual LAN with Intel® Ethernet Controller I210-ATVirtual Machine Device Queues reduce I/O overheadSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputRealtek RTL8211E PHY (dedicated IPMI) |
| Graphics | Aspeed AST2400 BMC |
| Input / Output | |
| SATA | 2 SATA3 (6Gbps) ports 4 SATA2 (3Gbps) ports |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 6 USB 2.0 ports (4 rear + 2 headers) 2 USB 3.0 ports (1 header + 1 Type A) |
| Video Output | 1 VGA D-Sub Connector port |
| Serial Port / Header | 2 COM Ports (1 rear, 1 header) |
| TPM | TPM Header |
| Expansion Slots | |
| PCI-E | 1 PCI-E 3.0 x16 1 PCI-E 2.0 x4 (in x8 slot)5 - 5V PCI 32bit |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | ACPI 5.0 USB Keyboard support |
| Management | |
| Software | IPMI2.0, NMI, SuperDoctor® III, Watchdog |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | +12V, +3.3V, +5V standby, 3 Phase-switching voltage regulator with auto-sense from 1.5V-1.86V, Chipset Voltage, Memory Voltages, VBAT |
| FAN | 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, Support 3-pin fans (w/o speed control) |
| Temperature | Monitoring for CPU and chassis environment, CPU thermal trip support, FC temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI |
| LED | CPU / System Overheat LED, +5V Standby alert LED |
| Other Features | Chassis intrusion detection, Chassis intrusion header |
| Operating Environment | |
| Operating Temperature Range | 0°C ~ 50°C (32°F ~ 122°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
