製品仕様
| Product SKUs | |
|---|---|
| MBD-X10SLE-DF | X10SLE-DF |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 4.6" x 18.5" (11.68cm x 46.99cm) |
| Processor/Cache | |
| CPU | Intel® 4th Generation Core i3 series, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series. Single Socket LGA 1150 supported 8th Gen Intel® Core desktop processors are supported with Intel® 300 Series chipset motherboards only |
| System Memory | |
| Memory Capacity | Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots Up to 32GB ECC VLP-UDIMM DDR3-1600MHz per node |
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 2GB, 4GB, 8GB |
| Memory Voltage | 1.35V, 1.5V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C224 Express PCH |
| SATA | Intel® C224 controller for 2 SATA3 (6 Gbps) ports; RAID 0,1 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Dual LAN with Intel® i350 Gigabit Ethernet ControllerSingle LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)Shared with 2 Nodes |
| Graphics | Aspeed AST2400 BMC via KVM connector |
| Input / Output | |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 2.0 via KVM connector |
| Video Output | 1 VGA port, via KVM connector |
| Serial Port / Header | 1 COM Port (1 rear), via KVM connector |
| Others | KVM connector for 2 USB 2.0, VGA and COM Ports |
| Expansion Slots | |
| PCI-E | N/A |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI (SMBIOS) 2.7 ACPI 5.0 USB Keyboard support |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® III, Watchdog |
| System Mangement Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | +12V, +3.3V, +5V, +5V standby, 3+1 Phase-switching voltage regulator, 3.3V standby, Memory, Memory Voltages, Supports system management utility, System level control, System temperature, VBAT |
| FAN | Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, System level control, Thermal control tachometer fan connectors |
| Temperature | Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
| LED | CPU / System Overheat LED, UID/Remote UID |
| Other Features | ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, UID, WOL |
| Operating Environment | |
| Operating Temperature Range | 0°C ~ 50°C (32°F ~ 122°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
