製品仕様
| Product SKUs- Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| SYS-6025C-URB | SuperServer 6025C-URB(Black) |
| Motherboard | |
| Motherboard | Super X7DCU |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
|
| System Bus | 1333 / 1066 MHz system bus |
| Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
| System Memory | |
| Memory Capacity | Six 240-pin DIMM slots Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM Dual channel memory bus Memory must be populated in pairs |
| Memory Type | 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® 5100 (San Clemente) chipset Intel® ICH9R |
| SATA | Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMSO(+)) (Optional: AOC-SIMSO(+)) |
| Network Controllers | Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK505 chip |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2 rear + 1 Type A connector + 2 headers (3 Ports) 6 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port |
| System BIOS | |
| BIOS Type | 16Mb SPI Flash with Phoenix ® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0/3.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3 |
| Chassis | |
| Form Factor | 2U Rackmount |
| Model | SC825TQ-R700U |
| Dimensions | |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648mm) |
| Gross Weight | 55 lbs (24.9kg) |
| Available Colors | Silver, Black |
| Front Panel | |
| Buttons | • Power On/Off button• System Reset button |
| LEDs | • Power LED• Hard drive activity LED• 2x Network activity LEDs• System Overheat / Fan Fail LED• Power fail LED |
| Ports | 2x USB Ports + DB9 COM Port (optional) |
| Expansion Slots | |
| Left Side | 1 Universal I/O (UIO) Slot 3 (x8) PCI-E Slots (Full-height / Full-length) |
| Drive Bays | |
| Hot-swap | 8x 3.5"SATA Hot-swap drive trays Supports up to 6x SATA hard drives |
| Peripheral Drives | |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy | Slim 1.44MB Floppy Drive (Optional) |
| SATA Backplane | |
| SATA Backplane | 1x 2U SATA backplane |
| System Cooling | |
| Fans | 3x 80mm 6300 RPM fans |
| Shroud | 1x Air Shroud |
| Power Supply | |
| Power Supply | 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| AC Voltage | 100 - 240V, 60-50Hz, 10 - 4 Amp |
| +5V standby | 4 Amp |
| +12V | 57 Amp |
| With Power Distributor | +5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores,VTT, +1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of eight 4-pin fans 8x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/ speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend-state Indicator LED UID |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします！
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel：03-3815-9001
URL：https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel：03-3815-9001
URL：https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします！
まずはお気軽にお問い合わせください。
CLOSE
