製品仕様
| Product SKUs | |
|---|---|
| SYS-7046GT-TRF-TC4 | SuperServer 7046GT-TRF-TC4 (Black) |
| Motherboard | |
| Motherboard | Super X8DTG-QF |
| Processor/Cache | |
| CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| QPI | up to 6.4 GT/s |
| GPU | 4x Nvidia Tesla C1060 GPU Cards |
| System Memory | |
| Memory Capacity | 12x 240-pin DIMM slots Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Dual Intel® 5520 (Tylersburg) chipset ICH10R |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
| Network Controllers | Intel® Dual 82574L Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| Expansion Slots | |
| PCI-Express | 4 (x16) PCI-E 2.0 slots 2 (x4) PCI-E 2.0 (in x16 slots) 1 (x4) PCI-E (in x8 slot) |
| PCI | 2x 33MHz PCI slots |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| LAN | 2x RJ45 LAN ports |
| USB | 4x USB rear ports 2x USB on-board 1x USB internal header - 2 ports Total 8 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option) |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Chassis | |
| Form Factor | 4U Rackmountable / Tower Optional Rackmount Kit |
| Model | CSE-747TQ-R1400B |
| Dimensions | |
| Height | 17.8" (452mm) |
| Width | 7" (178mm) |
| Depth | 26.5" (673mm) |
| Gross Weight | 72 lbs (32.7kg) |
| Package | 38.6" x 26.6" x 17.4" |
| Available Color | Dark Gray |
| Front Panel | |
| Buttons | LED Power On/Off button System Reset button |
| LEDs | Hard drive activity LED 2x Network activity LEDs System Overheat LED Power Fail LED |
| Ports | 2x Front side USB Ports |
| Drive Bays | |
| Hot-swap | 8x 3.5" Hot-swap SAS/SATA Drive Bays Supports up to 6 SATA Drives |
| Peripheral Bay(s) | 3x 5.25" drive bays in storage module -rotates 90° for Rackmount 1x 3.5" fixed drive bay |
| SAS / SATA Backplane | |
| SAS / SATA Backplane | SAS / SATA Hard Drive Backplane with SES2 |
| System Cooling | |
| Fans | 4x 5000 RPM Hot-swap Cooling Fans 2x 5000 RPM Hot-swap Rear Exhaust Fan |
| Power Supply | |
| Power Supply | 1400W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input | 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz |
| DC Output | 1100W: +12V/92A; +5Vsb/4A 1400W: +12V/116A; +5Vsb/4A |
| With Distributor | +5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp |
| Certification | |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| FAN | Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel:03-3815-9001
URL:https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel:03-3815-9001
URL:https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします!
まずはお気軽にお問い合わせください。
