製品仕様
| Product SKUs | |
|---|---|
| SuperWorkstation | SYS-7047A-73 (Black) |
| Motherboard | |
| Motherboard | Super X9DA7 |
| Processor/Cache | |
| CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† |
| Note | † BIOS version 3.0 or above is required |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| System Memory | |
| Memory Capacity | 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602 Chipset |
| SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 |
| SAS | SAS2 via Broadcom 2308 RAID 0, 1, 10 support |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Audio | RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
| Super I/O | Nuvoton W83627 |
| Input / Output | |
| SATA | 2x SATA 3.0 ports (6Gbps) 6x SATA 2.0 ports (3Gbps) |
| SAS | 8x SAS2 ports (6Gbps) |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| USB | 4x USB 3.0 ports (2 front + 2 rear) 7x USB 2.0 ports (4 rear + 2 via header + 1 Type A) |
| Audio | Line-in / Line-out / Microphone Ports |
| Keyboard/Mouse | PS/2 Keyboard/Mouse port |
| Serial Port / Header | 1x Fast UART 16550 ports |
| IEEE 1394a | 2x Headers |
| DOM | 1 DOM (Disk on Module) power connector |
| Expansion Slots | |
| PCI-Express | 3 (x16) PCI-E 3.0 slots 2 (x8) PCI-E 3.0 slots 1 (x4) PCI-E 3.0 slot |
| System BIOS | |
| BIOS Type | 64Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
| Chassis | |
| Form Factor | 4U Rackmountable / Tower Optional Rackmount Kit |
| Model | CSE-743TQ-1200B-SQ |
| Dimensions | |
| Height | 17.8" (452mm) |
| Width | 7.0" (178mm) |
| Depth | 25.5" (648mm) |
| Gross Weight | 71 lbs (32.2 kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED |
| Ports | 2x front USB 3.0 Ports |
| Drive Bays | |
| Hot-swap | 8x 3.5" Hot-swap SATA Drive Trays |
| Peripheral Bay(s) [90o Rotatable] | 2x 5.25" Peripheral Drive Bay 1x 5.25" Bay for Floppy Drive |
| SAS / SATA Backplane | |
| SAS / SATA Backplane | SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| System Cooling | |
| Fans | 2x 80mm PWM Super Quiet Fans 1x 92mm PWM Super Quiet Rear Fan |
| Power Supply | |
| Power Supply | 1200W high-efficiency power supply w/ PMBus |
| AC Input | 1000W: 100-114.9 V, 50-60 Hz, 12 Amp 1200W: 114.9-240 V, 50-60 Hz, 12-8 Amp |
| DC Output1000W max1200W max | +3.3V / +5V / +12V / -12V / +5VSB 20A / 20A / 83A / 0.3A / 3A 20A / 20A / 99A / 0.3A / 3A |
| Note: | Max. continuous combined load on +3.3V and +5V output shall not exceed 120W. |
| Certification | |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| FAN | Total of three fan headers supporting up to 8 fans Three 4-pin fan headers 3x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only) |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel:03-3815-9001
URL:https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel:03-3815-9001
URL:https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします!
まずはお気軽にお問い合わせください。
