サーバー

    5038A-i

    タワー Xeon E5-2600 v4Xeon E5-2600 v3Xeon E5-1600 v3 シングル電源

    製品仕様

    Product SKUs
    SuperWorkstationSYS-5038A-I (Black)
    Processor
    CPUIntel® Xeon® processor E5-2600 v4/v3, E5-1600 v4/v3 familyor Intel® Core™ i7 series(up to 160W TDP **)
    Single Socket R3 (LGA 2011)
    Core / CacheUp to 22 Cores / Up to 55MB Cache
    Note BIOS version 2.0 or above is required
    ** Motherboard supports this maximum TDP. Please verify your system can thermally support
    System Memory
    Memory Capacity8x 288-pin DDR4 DIMM slots
    Up to 1TB ECC 3DS LRDIMM
    Up to 512GB ECC LRDIMM
    Up to 256GB ECC RDIMM
    Up to 128GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only)
    Memory Type2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
    DIMM Sizes3DS LRDIMM: 128GB
    LRDIMM: 64GB, 32GB
    RDIMM: 32GB, 16GB, 8GB, 4GB
    Memory Voltage1.2 V
    Error DetectionCorrects single-bit errors
    Detects double-bit errors (using ECC memory)
    On-Board Devices
    ChipsetIntel® C612 chipset
    SATASATA3 (6Gbps) via C612 controller
    RAID 0, 1, 5, 10 support
    Network ControllersIntel® i210-AT Dual Port Gigabit Ethernet
    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    AudioRealTek ALC1150 High Definition Audio
    Input / Output
    SATA10x SATA3 (6Gbps) ports via PCH
    LAN2x RJ45 Gigabit Ethernet LAN ports
    USB8x USB 3.0 ports (2 front + 6 rear)
    Audio7.1 HD Jacks
    Keyboard/Mouse1x PS/2 Keyboard/Mouse port
    Serial Port / Header1x header
    TPM1x TPM 1.2 20-pin Header
    Expansion Slots
    PCI-Express4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8)
    2x PCI-E 2.0 x1 (in x4) slots

    PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when an Intel Core i7-5820K is installed
    System BIOS
    BIOS Type128Mb SPI Flash EEPROM with AMI® BIOS
    BIOS FeaturesPlug and Play (PnP)
    APM 1.2
    DMI 2.3
    PCI 2.3
    ACPI 1.0 / 2.0 / 3.0 / 4.0
    USB Keyboard support
    Hardware BIOS Virus protection
    SMBIOS 2.7.1
    UEFI 2.3.1
    RTC (Real Time Clock) Wakeup
    Management
    SoftwareSuperDoctor® 5
    SuperDoctor® III
    Watch Dog
    Power ConfigurationsACPI Power Management
    Keyboard Wakeup from Soft-Off
    CPU Fan auto-off in sleep mode
    Power-on mode for AC power recovery
    Chassis
    Form FactorMid-Tower
    ModelCSE-732D3-903B
    Dimensions and Weight
    Height16.7" (424mm)
    Width7.6" (193mm)
    Depth20.68" (525.3mm)
    WeightGross Weight: 35.5 lbs (16.1kg)
    Net Weight: 29.5 lbs (13.4 kg)
    Available ColorsBlack
    Front Panel
    ButtonsPower On/Off button
    LEDsPower LED
    Hard drive activity LED
    Network activity LED
    System Information LED
    Ports2x front USB 3.0 Ports
    2x front HD/AC97 Audio Ports
    Drive Bays
    Internal4x 3.5" fixed drive bays
    Enterprise SATA HDD only recommended
    Peripheral2x 5.25" peripheral drive bays
    1x card reader module
    System Cooling
    Fans1x 12cm front cooling fan
    Power Supply
    AC Voltage100-240 V, 50-60 Hz, 10-6 Amp
    +5V Standby3 Amp
    +12V125 Amp
    +12V225 Amp
    +12V325 Amp
    +12V425 Amp
    +5V25 Amp
    +3.3V25 Amp
    -12V0.5 Amp
    CertificationGold Level   Gold Level
    Note:• Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
    • Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.
    PC Health Monitoring
    Voltage+12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
    FANTotal of 5 fan headers supporting up to 5 fans
    5 fan headers with tachometer status monitoring
    Status monitor for speed control
    Status monitor for on/off control
    Low noise fan speed control
    Pulse Width Modulated (PWM) fan connectors
    TemperatureMonitoring for CPU and chassis environment
    CPU thermal trip support
    I2C temperature sensing logic
    Thermal Monitor 2 (TM2) support
    PECI
    Operating Environment / Compliance
    RoHS
    RoHS Compliant
    Environmental Spec.Operating Temperature:
       10°C to 35°C (50°F to 95°F)
    Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
    Operating Relative Humidity:
       8% to 90% (non-condensing)
    Non-operating Relative Humidity:
       5% to 95% (non-condensing)

    ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!

    1. お問い合わせ

      まずは、お電話またはお問い合わせフォームよりご連絡ください。
      ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。

      以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
      ・CPU (コア数,クロック数)
      ・メモリ (容量)
      ・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
      ・OS
      ・GPU等拡張カードの有無
      ・I/Oポート仕様
      ・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
      ・希望納期

      お問い合わせ先
      Tel:03-3815-9001
      URL:https://www.sunwaytech.co.jp/contact/

    2. ご提案・お見積り

      お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
      技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。

    3. ご注文

      お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
      ご注文後、正式な納期や手配状況をご案内いたします。

    4. 入荷検査・キッティング

      海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
      ご要望に応じて、初期設定やOSのインストールなども承ります。

    5. 納品

      ご指定の場所へサーバーを発送いたします。
      納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。

    6. アフターサポート

      納品後も安心してご利用いただけるよう、サポート体制を整えております。
      ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。

      サポート窓口
      Tel:03-3815-9001
      URL:https://member.sunwaytech.co.jp/login

      安心・確実なサーバー導入をサポートいたします!
      まずはお気軽にお問い合わせください。

    複数条件から探す

    メーカー、筐体サイズ、仕様(CPU、CPUソケット数、最大GPU数)、特長・用途などから製品を探せます。

    キーワードから探す

    CLOSE

    サーバー・産業用PCに関するご相談・お見積りなど
    お気軽にお問い合わせをください。

    03-3815-9001 受付時間/平日9:30 〜 18:00