製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X8DTL-i-O | X8DTL-i(Standard Retail Pack) |
| MBD-X8DTL-i-B | X8DTL-i(Bulk Pack) |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 12" x 10" (30.5cm x 25.4cm) |
| Processor/Cache | |
| CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | 6x 240-pin DIMM slots Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB**, 16GB** |
| Memory Voltage | 1.5 V / 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 5500 (Tylersburg) chipset ICH10R + IOH-24D |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| Network Controllers | 2x Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | Matrox G200eW |
| Super I/O | Winbond® 83627DHG-P chip |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 1x USB on-board 2x USB internal headers Total 5 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option) |
| Chassis ( Optimized for X8DTL-i) | |
| 1U Chassis | CSE-512F-600B CSE-811L-600B CSE-811TQ-600B |
| 2U Chassis | CSE-825TQ-560LPB CSE-826A-R1200LPB CSE-826E1-R800LPB CSE-826E2-R800LP CSE-826TQ-R800LPB |
| 3U Chassis | CSE-833T-550B CSE-833T-650B CSE-833T-R760B CSE-835TQ-R800B CSE-835TQ-R920B CSE-836A-R1200B CSE-836E1-R800B CSE-836E2-R800B CSE-836TQ-R800B CSE-933E1-R760B CSE-933E2-R760B CSE-933T-R760B CSE-936A-R1200B CSE-936A-R900B CSE-936E1-R900 |
| Tower / 4U Rackmount | CSE-745TQ-920B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots | |
| PCI-Express | 2 (x8) PCI-E 2.0 (1 in x16 slot) 1 (x4) PCI-E 2.0 (in x8 slot) 1 (x4) PCI-E (in x8 slot) |
| PCI | 2x 33MHz PCI slots |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Management | |
| Software | SuperDoctor® III |
| Power Configurations | ACPI / ACPM Power Management |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator |
| FAN | Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only) |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 6x fan connectors PECI |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
