製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7DWU-O | X7DWU (Standard Retail Pack) |
| MBD-X7DWU-B | X7DWU (Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 13.05" x 12.075" (33.2cm x 30.67cm) |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
|
| System Bus | 1600 / 1333 / 1066 MHz system bus |
| System Memory | |
| Memory Capacity | Eight 240-pin DIMM sockets Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Sparing supported |
| Memory Type | 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8 V or 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 5400 (Seaburg) chipset MCH + ESB2 |
| SATA | Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMSO(+)) (Optional: AOC-SIMSO(+)) For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) |
| Network Controllers | Intel® 82575EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | ICS 401 chip |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 3x USB internal headers Total 5 USB 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header |
| Chassis ( Optimized for X7DWU ) | |
| 1U Chassis | CSE-815TQ-R650U CSE-815S-560U CSE-812L-520U |
| 2U Chassis | CSE-823MTQ-R700U CSE-825MTQ-R700U CSE-825TQ-R700U |
| Important Chassis Notes | To ensure system stability, a 550W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 20-pin are required] |
| Expansion Slots | |
| PCI-Express / PCI-X / UIO | Left Side 1 (x8) PCI-Express (2.0) + 1 UIO slots or 1 (x16) PCI-Express (2.0)Right Side 1 (x8) PCI-Express (2.0) For 2U configuration, Please go to UIO Riser Cards page |
| System BIOS | |
| BIOS Type | 16Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem ring-on |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of eight 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Support 3-pin fans (w/o speed control) Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PC temperture sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED UID / Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
