製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7DWE-O | X7DWE(Standard Retail Pack) |
| MBD-X7DWE-B | X7DWE(Bulk Pack) |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 12.05" x 10" (30.6cm x 25.4cm) |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
|
| System Bus | 1600 / 1333 / 1066 MHz system bus |
| System Memory | |
| Memory Capacity | Four 240-pin DIMM sockets Supports up to 32 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Sparing supported |
| Memory Type | 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8 V or 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 5400 (Seaburg) chipset MCH + ESB2 |
| SATA | Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP-B(+)) (Optional: AOC-SIMLP-3(+)) with 3rd LAN support |
| Network Controllers | Intel® 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | XGI Z9S controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | ICS 401 chip |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2 rear + 1 Type A connector + 2 headers (4 Ports) Total 7 USB 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port |
| Chassis ( Optimized for X7DWE) | |
| 2U Chassis | SC825TQ-R700LP SC825TQ-560LP SC823T-550LP |
| 3U Chassis | SC836TQ-R800 SC836E2-R800 SC836E1-R800 SC833T-R760 SC833T-550 SC933E2-R760 SC933E1-R760 SC933T-R760 |
| Tower / 4U Rackmount | SC745TQ-R800 SC745TQ-700 SC743TQ-R760 SC743T-R760 SC743T-650 |
| Important Chassis Notes | To ensure system stability, a 550W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots | |
| PCI-Express | 4 (x8) PCI-Express (Gen 2.0) 1 (x4) PCI-Express (Using x8 slot) |
| PCI-X | 1x 64-bit 133MHz PCI-X |
| UIO | 1x UIO slots |
| System BIOS | |
| BIOS Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, VBAT, Chipset Voltages. 4 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of six 4-pin fan headers supporting up to 6 fans 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
