製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7DWT-INF+-B | X7DWT-INF+ (Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 16.4" x 6.5 " (41.66cm x 16.5cm) |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
|
| System Bus | 1600 / 1333 / 1066 MHz system bus |
| System Memory | |
| Memory Capacity | Eight 240-pin DIMM sockets Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Sparing supported |
| Memory Type | 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8 V or 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 5400 (Seaburg) chipset ESB2 |
| Infiniband | Mellanox ConnectX IB Infiniband 20Gbps PCI-E 2.0 Controller |
| SATA | Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0, v.1.5 200-pin IPMI slot (SIMSO(+)) (Optional: AOC-SIMSO(+)) |
| Network Controllers | ntel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK410B |
| Input / Output | |
| Serial ATA | Four Serial ATA ports |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB internal headers Total 4 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Serial Port | 1 Fast UART 16550 serial port |
| Infiniband | 1 External Infiniband Connector |
| Chassis ( Optimized for X7DWT-INF+ ) | |
| 1U | SC808T-980 |
| Expansion Slots | |
| PCI-Express | 1 (x16) PCI-e Generation II slot |
| System BIOS | |
| BIOS Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0 USB Keyboard support SMBIOS 2.3 |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem remote ring-on |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of four proprietary fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
