製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X9DRW-7TPF+ -B | X9DRW-7TPF+ (Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary WIO |
| Dimensions | 12.8" x 16.5" (32.5cm x 41.9cm) |
| Processor/Cache | |
| CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP **) |
| Note | † BIOS version 3.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| System Memory | |
| Memory Capacity | 24x 240-pin DDR3 DIMM slots Up to 1.5TB DDR3 ECC LRDIMM Up to 768GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602J chipset |
| SATA | SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 |
| SAS | SAS2 from Broadcom 2208 (1GB cache) HW RAID 0, 1, 5, 6, 10, 50, 60 support Supports up to 16 devices as default, more HDD devices support is also available as an option ** For special sku, please contact your Supermicro Sales. |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® 82599 Dual Port 10G SFP+ Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video | G200 (Nuvoton WPCM450 BMC w/ graphic controller) |
| Input / Output | |
| SATA | 2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s) |
| SAS | 8 SAS2 ports (6Gb/s) |
| LAN | 2 SFP+ 10GbE LAN ports 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 7 USB 2.0 ports total(2 rear + 4 via header + 1 Type A) |
| Video | 1 VGA port |
| Keyboard/Mouse | 1 Combo Keyboard/Mouse PS/2 port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
| TPM | 1 TPM Header |
| Chassis (Optimized for X9DRW-7TPF+ ) | |
| 1U Chassis | CSE-119TQ-R700WB CSE-819TQ-R700WB |
| 2U Chassis | CSE-219A-R920WB CSE-829BTQ-R920WB |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. Please order the optional I/O shield (2 LAN + 2TG) separately if the order is not bulk. |
| SuperServer(s) with X9DRW-7TPF+ | |
| Model(s) | SYS-2027R-72RFTP+ SYS-6027R-72RFTP+ |
| Expansion Slots | |
| PCI-Express | Left hand riser: 1 PCI-E 3.0 (x32) Right hand riser: 1 PCI-E 3.0 (x16) |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management | |
| Software | SuperDoctor® III Watch Dog NMI Optional IPMI 1.5 / 2.0 |
| Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | 6x 4-pin fan headers (up to 6 fans) 6x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support RoHS |
| Operating Environment | |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
