製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X8DTU-LN4F+-B | X8DTU-LN4F+(Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 12.8" x 16.5" (32.5cm x 41.9cm) |
| Processor/Cache | |
| CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | 18x 240-pin DIMM slots Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| Note: | This board does not support LRDIMM memory. |
| On-Board Devices | |
| Chipset | Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC |
| Network Controllers | 2x Intel® 82576 Dual-Port Gigabit Ethernet Controllers (4 ports) Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| LAN | 4x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB rear ports 1x USB on-board 5x USB internal headers Total 8 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header |
| Chassis ( Optimized for X8DTU-LN4F+) | |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots | |
| PCI-Express / PCI-X / UIO | Left Side 1 (x16) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser cardRight Side 1 (x8) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser card For 2U configuration, Please go to UIO Riser Cards page |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III |
| Power Configurations | ACPI / ACPM Power Management |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| FAN | Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only) |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
