製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X8DTN+-O | X8DTN+(Standard Retail Pack) |
| MBD-X8DTN+-B | X8DTN+(Bulk Pack) |
| Physical Stats | |
| Form Factor | Enhanced Extended ATX |
| Dimensions | 13.68" x 13" (34.7cm x 33cm) |
| Processor/Cache | |
| CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | 18x 240-pin DIMM slots Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| Note: | This board does not support LRDIMM memory. |
| On-Board Devices | |
| Chipset | Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| IPMI | Supports for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP-B(+)) (Optional: AOC-SIMLP-3(+)) with 3rd LAN support NOTE: Supports chassis 2U and up |
| Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Input / Output | |
| Serial ATA | 6 Serial ATA ports 6 SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2 RJ45 LAN ports |
| USB | 2 USB rear ports 2 USB on-board 2 USB internal headers(3 ports) 7 total USB ports, 2.0 Compliant |
| VGA | 1 VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (opt) |
| Chassis ( Optimized for X8DTN+) | |
| 2U Chassis | CSE-213A-R900LPB CSE-216A-R900LPB CSE-216E16-R920LPB CSE-216E26-R920LPB CSE-826A-R1200LPB CSE-826TQ-R800LPB |
| 3U Chassis | CSE-836E16-R1200B CSE-836E26-R1200B CSE-936A-R900B CSE-936E1-R900 CSE-936E16-R1200B CSE-936E26-R1200B |
| Tower / 4U Rackmount | CSE-745TQ-800B CSE-846E16-R1200B CSE-846E26-R1200B CSE-846TQ-R900B CSE-847A-R1400LPB CSE-847E1-R1400LPB CSE-847E16-R1400LPB CSE-847E2-R1400LPB CSE-847E26-R1400LPB |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots | |
| PCI-Express | 2 (x8) PCI-E slots (1 in x16 slot) 1 (x4) PCI-E slot (in x8 slot) |
| PCI-X | 1x 64-bit 133MHz PCI-X (3.3V) slots 2x 64-bit 133/100MHz PCI-X (3.3V) slots |
| UIO | 1 UIO slot (PCI-E 2.0 x8 slot) |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5 SuperDoctor® III |
| Power Configurations | ACPI / ACPM Power Management |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages. 5-Phase-switching voltage regulator |
| FAN | Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only) |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
