製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X9DBL-i -O | X9DBL-i (Standard Retail Pack) |
| MBD-X9DBL-i -B | X9DBL-i (Bulk Pack) |
| Physical Stats | |
| Dimensions | 12" x 10" (30.48cm x 25.4cm) |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2400 and E5-2400 v2 (up to 95W TDP **) Dual Socket B2 (LGA 1356) |
| Cache | Up to 25MB |
| System Bus | QPI up to 8 GT/s |
| ** Motherboard supports this maximum TDP. Please verify your system can thermally support | |
| System Memory | |
| Memory Capacity | 6x 240-pin DDR3 DIMM slots Up to 384GB DDR3 ECC LRDIMM Up to 192GB DDR3 ECC Registered memory (RDIMM) Up to 48GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602 chipset |
| SATA | SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 |
| AHCI SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10 |
| SCU SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 |
| SAS | SAS from C606 RAID 0, 1, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® 82574L Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Video | G200 (Nuvoton WPCM150G) |
| Super I/O | Nuvoton W83527HG |
| Input / Output | |
| SATA | 2x SATA 3.0 ports (6Gb/s) 8x SATA 2.0 ports (3Gb/s) |
| AHCI SATA | 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) |
| SCU SATA | 4x SATA 2.0 ports (3Gbps) |
| SAS | 8x SAS/SATA2 ports |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| USB | 7x USB 2.0 ports total(2 rear + 4 via header + 1 Type A) |
| Video | 1x VGA port |
| Serial Port / Header | 2x Fast UART 16550 ports / 1 rear and 1 header |
| DOM | 1 DOM (Disk on Module) power connector |
| Chassis (Optimized for X9DBL-i ) | |
| 1U Chassis | CSE-113MTQ-600CB CSE-813MTQ-350C CSE-813MTQ-441CB CSE-813MTQ-R400CB |
| 2U Chassis | CSE-823TQ-653B |
| 3U Chassis | CSE-833T-653B |
| Tower / 4U Rackmount | CSE-842TQ-665B CSE-842TQ-865B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. |
| Expansion Slots | |
| PCI-Express | 1x PCI-E 3.0 x16 3x PCI-E 3.0 x8 1x PCI-E 3.0 x4 (in x8) 1x PCI-32(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
| System BIOS | |
| BIOS Type | 64Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management | |
| Software | SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | Six 4-pin fan headers with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free Dual Cooling Zones |
| Operating Environment | |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
キーワードから探す
CLOSE
