製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7DCA-L-O | X7DCA-L(Standard Retail Pack) |
| MBD-X7DCA-L-B | X7DCA-L(Bulk Pack) |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 10" x 10 " (25.4cm x25.4cm) |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
|
| System Bus | 1333 / 1066 MHz system bus |
| Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
| System Memory | |
| Memory Capacity | Six 240-pin DIMM sockets Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM Dual channel memory bus |
| Memory Type | 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512MB, 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® 5100 (San Clemente) chipset Intel® ICH9R |
| SATA | Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| Network Controllers | Dual Intel® 82573L Single Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | XGI Z9s with 32 MB of DDR2 memory |
| Audio | High Definition 7.1 Channel Audio |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | ICS9LPR501 chip |
| Input / Output | |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 4 rear + 2 Type A connectors + 1 headers (2 Ports) 8 total USB ports, 2.0 Compliantt |
| VGA | 1x VGA Port |
| Audio | High Definition 7.1 Channel Audio Line-in / Line-out / Microphone Ports |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 header |
| Chassis ( Optimized for X7DCA-L) | |
| Mid Tower | CSE-733TQ-645 CSE-733TQ-465 CSE-733T-645 CSE-733T-465 |
| Tower / 4U Rackmount | CSE-743T-645(FAN-0091, CBL-0088 Required) CSE-743i-645(FAN-0091, CBL-0088 Required) CSE-742T-650 |
| Important Chassis Notes | To ensure system stability, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots | |
| PCI-Express | 1 (x16) PCI-e slot 1 (x8) PCI-e slot 1 (x4) PCI-e (using x8) slot |
| PCI | 1x 32-bit 33MHz PCI (5V) slots |
| System BIOS | |
| BIOS Type | 16Mb SPI Flash with Phoenix ® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0/3.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3 |
| Management | |
| Software | SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header CPU Fan auto-off in sleep mode Power-on mode for AC power recovery Internal/External modem remote ring-on |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Six 4-pin fan headers 6x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors PSU I2C temperature sensing logic |
| LED | CPU / System Overheat LED Suspend-state Indicator LED +5V Standby alert LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
