製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X8STi-3F-O | X8STi-3F(Standard Retail Pack) |
| MBD-X8STi-3F-B | X8STi-3F(Bulk Pack) |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 12" x 9.6" (30.5cm x 24.4cm) |
| Processor/Cache | |
| CPU | LGA 1366 Socket Intel® Core™ i7-980X, i7-975 and i7-965 Extreme Edition Intel® Core™ i7 series Intel® Xeon® 5600/5500 series Intel® Xeon® 3600/3500 series |
| System Bus | QPI (up to 6.4 GT/s) |
| System Memory | |
| Memory Capacity | Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets |
| Memory Type | 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® X58 Express chipset ICH10R |
| SAS | Broadcom SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support |
| SATA | Intel ICH10R SATA (3.0Gbps) Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC |
| Network Controllers | 2x Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| VGA | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| Input / Output | |
| SAS | 8 SAS / SATA ports |
| Serial ATA | 6 SATA ports 6 SATA hard drives supported |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB rear ports 2x USB on-board 2x USB internal header(4 ports) Total 8 USB 2.0 Compliant |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1x Fast UART 16550 serial port 1x internal header |
| Chassis ( Optimized for X8STi-3F) | |
| 1U Chassis | CSE-113MTQ-560CB CSE-512C-260 CSE-512F-260 CSE-512L-260B CSE-513F-260B CSE-513L-260 CSE-811i-260 CSE-811i-280 CSE-811i-300 CSE-811T-260 CSE-811T-300 CSE-811TQ-280 CSE-813MT-300C CSE-813MTQ-280C |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots | |
| PCI-Express | 1 (x16) PCI-e 2.0 slot 1 (x8) PCI-e slot |
| PCI | 1x 32-bit PCI slot |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI / ACPM Power Management Main Switch Override Mechanism Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode for AC power recovery Internal/External modem ring-on |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED +5V Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
