製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7SBE-O | X7SBE(Standard Retail Pack) |
| MBD-X7SBE-B | X7SBE(Bulk Pack) |
| Physical Stats | |
| Form Factor | |
| Dimensions | |
| Processor/Cache | |
| CPU | Single LGA775 ZIF Socket Supports Quad-Core Intel® Xeon® X3300/X3200 series Supports Dual-Core Intel® Xeon® E3100/3000 series Supports Intel® Xeon® processor L3360 and L3110 series Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series Supports Intel® Pentium® E5000/E2000 series Supports Intel® Celeron® E1000 and 400 series NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported. |
| System Bus | 1333 / 1066 / 800 MHz system bus |
| System Memory | |
| Memory Capacity | Four 240-pin DIMM sockets Supports up to 8 GB of memory (Dual Channel) |
| Memory Type | DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2GB |
| Memory Voltage | 1.8V only |
| On-Board Devices | |
| Chipset | Intel 3210 chipset ICH9R + PXH + Intel® 82573V + Intel® 82573L |
| Serial ATA | Intel® ICH9R SATA2 (3 Gbps) controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support 200-pin IPMI slot (Optional: AOC-SIMLC-HTC) (Optional: AOC-SIM1U+)-KVM-over-LAN support NOTE: Must use Dedicated LAN for KVM-over-LAN function |
| Network Controllers | 2x Single-port Gigabit PCI-Express Ethernet Controllers Intel® 82573V + Intel® 82573L Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output |
| VGA | On-board ATI ES1000 (32MB) graphics |
| Super I/O | Winbond W83627HG-AW chip |
| Clock Generator | CK505 |
| Input / Output | |
| Serial ATA | Six Serial ATA ports (3 Gbps performance) Six SATA hard drives supported |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | Up to 7x USB 2.0 / 1.1 compliant ports 2 rear ports 2 internal heades for 4 USB 2.0/1.1 ports + 1 on-board |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x internal header |
| Chassis ( Optimized for X7SBE) | |
| 2U Chassis | CSE-823TQ-R500LP CSE-825MTQ-R700LPB |
| Mid-Tower | CSE-733E-465B CSE-733i-465B CSE-733T-465B CSE-733TQ-465B |
| Tower / 4U Rackmount | CSE-743TQ-865B |
| Important Note | For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability]. |
| Expansion Slots | |
| PCI-Express | 1 (x8) PCI-e slot 1 (x4) PCI-e slot |
| PCI-X | 2 64 bit PCI-X 133 Mhz slot 2 64 bit PCI-X 100 Mhz slot |
| System BIOS | |
| BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS® |
| BIOS Features | Plug and Play (PnP) DMI 2.3 support PCI 2.2 ACPI 1.0/2.0 SMBIOS 2.3 USB Keyboard support |
| Management | |
| Software | SuperDoctor® III Watch Dog NMI H/W Monitor in W83627DHF(PECI support) |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery Internal/External modem remote ring-on |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset) CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V Adjustable CPU clock frequency ratio (Only available if CPU is supported) |
| FAN | Total of six 4-pin fan headers 6x fans with tachometer monitoring Status monitor with firmware / software speed control Status monitor for on/off control Support 3-pin and 4-pin Fan speed control Low noise fan speed control Pulse Width Modulated (PWM) fan connector |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip support Thermal Monitor (TM2) Support PECI |
| LED | CPU / System Overheat LED Suspend-state indicator LED +5 Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
