製品仕様
| Product SKUs | |
|---|---|
| MBD-X10QBL-CT | X10QBL-CT |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 16.79″ x 16.4″ (42.65cm x 41.66cm) |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E7-8800 v3, Intel® Xeon® processor E7-8800 v4. Quad Socket R (LGA 2011) supported, CPU TDP support 165W TDP, 1 QPI up to 9.6GT/s |
| Cores / Cache | Up to 24 cores / Up to 60 MB cache |
| System Memory | |
| Memory Capacity | Up to 2TB 3DS ECC RDIMM, DDR3-1600MHz; Up to 2TB 3DS ECC LRDIMM, DDR3-1600MHz, in 32 DIMM slots |
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 4GB, 8GB, 16GB, 32GB, 64GB |
| Memory Voltage | 1.35V, 1.5V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C602J |
| SATA | SATA2 (3 Gbps) RAID 0,1,5,10 SATA3 (6 Gbps) RAID 0,1JBOD support (IT Mode) |
| SAS | SAS3 (12Gbps) via Broadcom 3008 controller SW RAID 0, 1, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Dual LAN with Intel® X540 10GBase-T Ethernet ControllerX10QBL-CTSingle LAN with Virtual Machine Device Queues reduce I/O overheadSingle LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputSingle LAN with Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | Aspeed AST2400 BMC |
| Input / Output | |
| SATA | 2 SATA3 (6Gbps) port 4 SATA2 (3Gbps) ports |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 6 USB 2.0 ports (3 rear + 2 headers + 1 Type A) |
| Video Output | 1 VGA port |
| Serial Port / Header | 2 COM Ports (1 rear, 1 header) |
| TPM | 1 TPM Header |
| Expansion Slots | |
| PCI-E | 2 PCI-E 3.0 x16, 2 PCI-E 3.0 x8, , |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management | |
| Software | IPMI2.0, KVM with dedicated LAN, SPM, SUM, SuperDoctor® 5, Watchdog |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism CPU Fan auto-off in sleep mode Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | +1.8V, +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, Memory, Monitors for CPU Cores, VBAT |
| FAN | 8x 4-pin fan headers (up to 8 fans), 4x 9cm + 3x 8cm fans w/ speed control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control |
| Temperature | Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection, Chassis intrusion header, SDDC |
キーワードから探す
CLOSE
