製品仕様
Product SKUs | |
---|---|
MBD-X10QBI | X10QBI |
Physical Stats | |
Form Factor | Proprietary |
Dimensions | 19" x 17" (48.26cm x 43.18cm) |
Processor/Cache | |
CPU | Intel® Xeon® processor E7-4800 series, Intel® Xeon® processor E7-4800 v2, Intel® Xeon® processor E7-4800 v3, Intel® Xeon® processor E7-4800 v4, Intel® Xeon® processor E7-8800 v2, Intel® Xeon® processor E7-8800 v3, Intel® Xeon® processor E7-8800 v4. Quad Socket R1 (LGA 2011) supported, CPU TDP support 165W TDP |
Cores / Cache | Up to 24 cores / Up to 60 MB cache |
System Memory | |
Memory Capacity | Up to 12TB 3DS ECC RDIMM, DDR4-1866MHz; Up to 12TB 3DS ECC LRDIMM, DDR4-1866MHz1866/1600/1333/1066/800MHz ECC DDR4 , 96 DIMM slots, up to 12 TB total memory capacity |
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated DIMMs |
DIMM Sizes | RDIMM: 4GB, 8GB, 16GB, 32GB LRDIMM: 32GB, 64GB 3DS LRDIMM: 128GB |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices | |
Chipset | Intel® C602J |
SATA | 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10 2 SATA2 (3 Gbps) ports; 4 RAID 0,1,5,10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Network Controllers | Intel® X540 Dual port 10GBase-TVirtual Machine Device Queues reduce I/O overheadSupports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output1 Realtek RTL8291F PHY (dedicated IPMI) |
Graphics | Aspeed AST2400 BMC |
Input / Output | |
SATA | 2 SATA3 (6Gbps) port 4 SATA2 (3Gbps) ports |
LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
USB | 6 USB 2.0 ports (4 rear2 Type A) |
Video Output | 2 VGA (1 rear bezel, 1 front panel) ports |
Serial Port / Header | 2 COM Ports (1 rear, 1 header)2 fast UART 16550 serial |
Expansion Slots | |
PCI-E | 4x PCI-E 3.0 x16 (slot 2, 4, 9, 11) 7x PCI-E 3.0 x8 (slot 1, 3, 5, 6, 7, 8, 10) |
System BIOS | |
BIOS Type | AMI UEFI |
Management | |
Software | IPMI2.0, SuperDoctor® III |
PC Health Monitoring | |
Voltage | +1.8V, +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, Memory, VBAT |
FAN | 7x 4-pin fan headers (up to 7 fans), 4x 9cm + 3x 8cm fans w/ speed control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control |
Temperature | Monitoring for CPU and chassis environment |
LED | CPU / System Overheat LED |
Other Features | Chassis intrusion detection, Chassis intrusion header, SDDC |
キーワードから探す
CLOSE