製品仕様
| Product SKUs | |
|---|---|
| MBD-X8QB6-F-O | X8QB6-F(Standard Retail Pack) |
| MBD-X8QB6-F-B | X8QB6-F(Bulk Pack) |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 16.4" x 16.79" (41.66cm x 42.65cm) |
| Processor/Cache | |
| CPU | Quad 1567-pin LGA Sockets Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below: Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX) |
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | 32x 240-pin DIMM slots Supports up to 1024 GB 1066 / 978 / 800MHz DDR3 ECC Registered memory Memory Mirroring supported |
| Memory Type | 1333* / 1066 / 978 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 32GB** |
| Memory Voltage | 1.5 V, 1.35V** |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 7500 (Boxboro-EX) chipset ICH10R |
| SAS | Broadcom 6Gb/s SAS 2108 (512MB cache) RAID 0, 1, 5, 6, 10, 50, 60 support BBU (battery backup) extension kit (optional) |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC |
| Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond 83527HB chip |
| Input / Output | |
| SAS | 8x 6Gb/s SAS / SATA ports |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| LAN | 3x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB internal headers (3 ports) Total 5 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header |
| Chassis ( Optimized for X8QB6-F) | |
| Tower / 4U Rackmount | CSE-418E16-R1K62B CSE-848A-R1K62B CSE-848E16-R1K62B (for SC748, rev. K required, Air Shroud MCP-310-74805-0B)(for SC848 & 418, rev. K required, Air Shroud MCP-310-84803-0B) |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots | |
| PCI-Express | 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III |
| Power Configurations | ACPI / ACPM Power Management |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V |
| FAN | Total of 10 fan headers supporting up to 10 fans Ten 4-pin fan headers 10x fans with tachometer status monitoring Support 4-pin fans (w/o speed control) Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
