サーバー

    5018D-MTF

    1U Xeon E3-1200 v4Xeon E3-1200 v3Core i5-4000Core i3 シングル電源

    製品仕様

    Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
    SYS-5018D-MTFSuperServer 5018D-MTF (Black)
    Processor/Cache
    CPUIntel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
    Socket H3 (LGA 1150)
    System Memory
    Memory Capacity4x 240-pin DDR3 DIMM slots
    Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
    Memory Type1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes8GB, 4GB, 2GB, 1GB
    Memory Voltage1.5 V
    Error DetectionCorrects single-bit errors
    Detects double-bit errors (using ECC memory)
    On-Board Devices
    ChipsetIntel® C224 Express PCH
    SATASATA3 (6Gbps) w/ RAID 0, 1, 10, 5
    SATA2 (3Gbps) w/ RAID 0, 1
    IPMISupport for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    ASPEED AST2400 BMC with 10/100/1000Mbps
    Network ControllersIntel® i217LM + Intel® i210AT Controllers
    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    1x Realtek RTL8201N PHY (dedicated IPMI)
    VGAASPEED AST2400 BMC
    Input / Output
    Serial ATA4x SATA3 (6Gbps) ports
    2x SATA2 (3Gbps) ports
    SATA DOM Power Connector
    LAN2x RJ45 LAN ports
    1x RJ45 Dedicated IPMI LAN port
    USB4x USB 3.0 ports (1 Type-A, 2+1 via header)
    6x USB 2.0 ports (4 rear, 2 via header)
    VGA1x VGA port
    Serial Port / Header1x Fast UART 16550 serial port
    1x internal header
    PC Health Monitoring
    VoltageMonitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
    5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
    FANTotal of five 4-pin fan headers supporting up to 5 fans
    5x fans with tachometer status monitoring
    Status monitor for speed control
    Status monitor for on/off control
    Support 3-pin fans (w/o speed control)
    Low noise fan speed control
    Pulse Width Modulated (PWM) fan connectors
    TemperatureMonitoring for CPU and chassis environment
    CPU thermal trip support
    FC temperature sensing logic
    Thermal Monitor 2 (TM2) support
    PECI
    LEDCPU / System Overheat LED
    +5V Standby alert LED
    Other FeaturesChassis intrusion detection
    Chassis intrusion header
    Chassis
    Form Factor1U Rackmount
    ModelCSE-813MTQ-350CB
    Dimensions and Weight
    Height1.7" (43mm)
    Width17.2" (437mm)
    Depth19.8" (503mm)
    WeightGross Weight: 30.4 lbs (13.8 kg)
    Net Weight: 17.6 lbs (8 kg)
    Available ColorsBlack
    Front Panel
    ButtonsPower On/Off button
    System Reset button
    LEDsPower LED
    Hard drive activity LED
    2x Network activity LEDs
    System Overheat LED
    Ports2x USB ports
    1x Serial COM Port
    Expansion Slots
    PCI-Express1x PCI-E 3.0 x8 (in x16) Full-height slot*
    Drive Bays
    Hot-swap4x 3.5" Hot-swap SATA3 HDDs w/ RAID
    Peripheral BaySlim optical drive (optional)
    System Cooling
    Fans4x 4cm 12,500 RPM PWM fans
    Optional fans to cool add-on cards
    Power Supply
    AC Voltage100-240 V, 50-60 Hz, 4.2-1.8 Amp
    +5V18 Amp
    +5V standby3 Amp
    +12V29 Amp
    +3.3V15 Amp
    CertificationGold Level Certified
      Gold Certified
      [
    Test Report ]
    System BIOS
    BIOS Type128Mb SPI Flash EEPROM with AMI BIOS
    BIOS FeaturesDMI 2.3
    PCI 2.3
    ACPI 1.0 / 2.0
    USB Keyboard support
    SMBIOS 2.3
    Management
    SoftwareIPMI (Intelligent Platform Management Interface) v2.0 with KVM support
    SuperDoctor® III
    Watch Dog
    NMI
    Power ConfigurationsACPI / ACPM Power Management
    Main Switch Override Mechanism
    Power-on mode for AC power recovery
    Internal/External modem ring-on
    Operating Environment / Compliance
    RoHS
    RoHS2 (2011/65/EU) Compliant
    Environmental Spec.Operating Temperature:
       10°C to 35°C (50°F to 95°F)
    Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
    Operating Relative Humidity:
       8% to 90% (non-condensing)
    Non-operating Relative Humidity:
       5% to 95% (non-condensing)

    ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!

    1. お問い合わせ

      まずは、お電話またはお問い合わせフォームよりご連絡ください。
      ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。

      以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
      ・CPU (コア数,クロック数)
      ・メモリ (容量)
      ・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
      ・OS
      ・GPU等拡張カードの有無
      ・I/Oポート仕様
      ・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
      ・希望納期

      お問い合わせ先
      Tel:03-3815-9001
      URL:https://www.sunwaytech.co.jp/contact/

    2. ご提案・お見積り

      お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
      技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。

    3. ご注文

      お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
      ご注文後、正式な納期や手配状況をご案内いたします。

    4. 入荷検査・キッティング

      海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
      ご要望に応じて、初期設定やOSのインストールなども承ります。

    5. 納品

      ご指定の場所へサーバーを発送いたします。
      納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。

    6. アフターサポート

      納品後も安心してご利用いただけるよう、サポート体制を整えております。
      ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。

      サポート窓口
      Tel:03-3815-9001
      URL:https://member.sunwaytech.co.jp/login

      安心・確実なサーバー導入をサポートいたします!
      まずはお気軽にお問い合わせください。

    複数条件から探す

    メーカー、筐体サイズ、仕様(CPU、CPUソケット数、最大GPU数)、特長・用途などから製品を探せます。

    キーワードから探す

    CLOSE

    サーバー・産業用PCに関するご相談・お見積りなど
    お気軽にお問い合わせをください。

    03-3815-9001 受付時間/平日9:30 〜 18:00