製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| SYS-1016T-M3FB | SuperServer 1016T-M3FB (Black) |
| Motherboard | |
| Motherboard | Super X8STi-3F |
| Processor/Cache | |
| CPU | LGA 1366 Socket NOTE: Intel Xeon® 3500 Series and Core™ i7 are Not Supported (Max TDP > 100 Watts) |
| System Bus | QPI (up to 6.4 GT/s) |
| System Memory | |
| Memory Capacity | Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets |
| Memory Type | 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® X58 Express chipset ICH10R |
| SAS | Broadcom 1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support |
| SATA | Intel ICH10R SATA (3.0Gbps) Controller RAID 0, 1, 5, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | 2x Intel® Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| VGA | Integrated Graphics |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| Expansion Slots | |
| PCI-Express | 1 (x16) PCI-E 2.0 slot via riser card AOC Compatibility Matrix 1 (x16) PCI-E 2.0 slot |
| Input / Output | |
| SAS | 8 SAS / SATA ports |
| Serial ATA | Six SATA ports Six SATA hard drives supported |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB on-board 2x USB internal header(4 ports) Total 8 USB 2.0 Compliant |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1x Fast UART 16550 serial port 1x internal header |
| System BIOS | |
| BIOS Type | 4Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Chassis | |
| Form Factor | 1U Rackmount |
| Model | CSE-113MTQ-560CB |
| Dimensions | |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 19.98" (508mm) |
| Packaging | 24" (W) x 8.5" (H) x 30" (L) |
| Weight | Net Weight: 18.5 lbs (8.4kg) Gross Weight: 29.5 lbs (13.4kg) |
| Available Color | Black |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED HDD activity LED 2x Network activity LEDs |
| Drive Bays | |
| Hot-swap | 8x 2.5" Hot-swap SAS / SATA drive bays |
| SAS / SATA Backplane | |
| SAS / SATA Backplane | 1x SAS / SATA Backplane |
| System Cooling | |
| Fans | 4x 40x28mm high-efficiency fans 6x fans maximum |
| Power Supply | |
| Power Supply | 560W AC to DC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 6.5-2.6 Amp |
| +5V | 15 Amp |
| +5V standby | 2 Amp |
| +12V | 46.5 Amp |
| -12V | 0.5 Amp |
| +3.3V | 15 Amp |
| Certification | |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED +5V Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel:03-3815-9001
URL:https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel:03-3815-9001
URL:https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします!
まずはお気軽にお問い合わせください。
