サーバー 販売終了

    5016T-MTFB

    1U シングル電源 販売終了

    製品仕様

    Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
    SYS-5016T-MTFBSuperServer 5016T-MTFB (Black)
    Motherboard
    MotherboardSuper X8STi-F
    Processor/Cache
    CPULGA 1366 Socket
  • Intel® Xeon®Processor 5600 Series (Westmere)
  • Intel® Xeon®Processor 5500 Series (Nehalem-EP)
    NOTE: Intel Xeon® 3500 Series and Core™ i7 are Not Supported (Max TDP > 100 Watts)
  • System BusQPI (up to 6.4 GT/s)
    System Memory
    Memory CapacitySupports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
    Three Channel memory bus
    6 DIMM sockets
    Memory Type1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes256MB, 512MB, 1GB, 2GB, 4GB
    Memory Voltage1.5 V
    Error DetectionCorrects single-bit errors
    Detects double-bit errors (using ECC memory)
    Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
    On-Board Devices
    ChipsetIntel® X58 Express chipset
    ICH10R
    SATAIntel ICH10R SATA (3.0Gbps) Controller
    RAID 0, 1, 5, 10 support
    IPMISupport for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    Nuvoton WPCM450 BMC
    Network Controllers2x Intel® Gigabit Ethernet Controllers
    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    1x Realtek RTL8201N PHY (dedicated IPMI)
    VGAIntegrated Graphics
    Super I/OWinbond 83627DHG chip
    Clock GeneratorCK505
    Expansion Slots
    PCI-Express1 (x16) PCI-E 2.0 slot via riser card
    AOC Compatibility Matrix
    Input / Output
    Serial ATASix SATA ports
    Six SATA hard drives supported
    Floppy1 Floppy controller; 1.44 MB
    LAN2x RJ45 LAN ports
    1x RJ45 Dedicated IPMI LAN port
    USB2x USB rear ports
    2x USB on-board
    2x USB internal header(4 ports)
    Total 8 USB 2.0 Compliant
    VGA1x VGA port
    Keyboard / MousePS/2 keyboard and mouse ports
    Serial Port / Header1x Fast UART 16550 serial port
    1x internal header
    System BIOS
    BIOS Type4Mb SPI Flash EEPROM with AMI BIOS
    BIOS FeaturesDMI 2.3
    PCI 2.2
    ACPI 1.0 / 2.0
    USB Keyboard support
    SMBIOS 2.3
    Chassis
    Form Factor1U Rackmount
    ModelSC813MTQ-280CB(Chassis not sold separately)
    Dimensions
    Height1.7" (43mm)
    Width17.2" (437mm)
    Depth19.8" (503mm)
    Gross Weight38 lbs (17.2kg)
    Available ColorsBlack
    Front Panel
    ButtonsPower On/Off button
    System Reset button
    LEDsPower LED
    Hard drive activity LED
    2x Network activity LEDs
    System Overheat / Fan Fail LED
    Ports2x Front USB Ports
    1x Serial COM Port
    Drive Bays
    Hot-swap4x 3.5" SATA Hot-swap drive bays
    System Cooling
    Fans4x Cooling Fans
    Power Supply
    Power Supply280W AC power supply w/ PFC
    AC Voltage100 - 240V, 50 - 60Hz, 5Amp
    +5V18 Amp
    +5V standby2 Amp
    +12V23Amp @ 100-140V, 27Amp @ 180-240V
    -12V1.0 Amp
    +3.3V15 Amp
    PC Health Monitoring
    CPUMonitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
    6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
    FANTotal of six fan headers supporting up to 6 fans
    Six 4-pin fan headers
    6x fans with tachometer status monitoring
    Status monitor for speed control
    Status monitor for on/off control
    Support 3-pin fans (w/o speed control)
    Low noise fan speed control
    Pulse Width Modulated (PWM) fan connectors
    TemperatureMonitoring for CPU and chassis environment
    CPU thermal trip support
    FC temperature sensing logic
    Thermal Monitor 2 (TM2) support
    PECI
    LEDCPU / System Overheat LED
    +5V Standby alert LED
    Other FeaturesChassis intrusion detection
    Chassis intrusion header
    Operating Environment
    Environmental Spec.Operating Temperature: 10°to 35°C (50°to 95°F)
    Non-operating Temperature: -40°to 70°C (-40°to 158°F)
    Operating Relative Humidity: 8% to 90% (non-condensing)
    Non-operating Relative Humidity: 5 to 95% (non-condensing)

    ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!

    1. お問い合わせ

      まずは、お電話またはお問い合わせフォームよりご連絡ください。
      ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。

      以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
      ・CPU (コア数,クロック数)
      ・メモリ (容量)
      ・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
      ・OS
      ・GPU等拡張カードの有無
      ・I/Oポート仕様
      ・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
      ・希望納期

      お問い合わせ先
      Tel:03-3815-9001
      URL:https://www.sunwaytech.co.jp/contact/

    2. ご提案・お見積り

      お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
      技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。

    3. ご注文

      お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
      ご注文後、正式な納期や手配状況をご案内いたします。

    4. 入荷検査・キッティング

      海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
      ご要望に応じて、初期設定やOSのインストールなども承ります。

    5. 納品

      ご指定の場所へサーバーを発送いたします。
      納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。

    6. アフターサポート

      納品後も安心してご利用いただけるよう、サポート体制を整えております。
      ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。

      サポート窓口
      Tel:03-3815-9001
      URL:https://member.sunwaytech.co.jp/login

      安心・確実なサーバー導入をサポートいたします!
      まずはお気軽にお問い合わせください。

    複数条件から探す

    メーカー、筐体サイズ、仕様(CPU、CPUソケット数、最大GPU数)、特長・用途などから製品を探せます。

    キーワードから探す

    CLOSE

    サーバー・産業用PCに関するご相談・お見積りなど
    お気軽にお問い合わせをください。

    03-3815-9001 受付時間/平日9:30 〜 18:00