製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-H8DCL-6F | H8DCL-6F (Standard Retail Pack) |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 12" x 10" |
| Processor/Chipset | |
| CPU | Dual 1207-pin Socket C32 Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors HT3.0 Link support |
| Chipset | AMD chipset SR5690 + SP5100 |
| System Memory | |
| Memory Capacity | 8 DIMM sockets Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs Dual channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix |
| Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| On-Board Devices | |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | LSI 2008 8 port SAS controller RAID 0, 1, 10; RAID 5 Optional Optional: AOC-SAS2-RAID5-KEYRAID 5 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC |
| Network Controllers | 2 Intel® 82574L single-port Gigabit Ethernet Controllers 10/100/1000BASE-T support |
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| Input / Output | |
| SATA | 6x SATA (3Gb/s) ports |
| SAS | Integrated LSI 2008 SAS2 Controller Eight Serial Attached SCSI (SAS) ports Each SAS port supports up to 4 SAS / SATA drives |
| LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
| USB | 7x USB 2.0 ports 2 rear, 1 Type-A, 2 headers for 4 ports |
| VGA | 1x VGA port |
| Serial Ports | 2x Fast UART 16550 serial port (one header & one port) |
| Power | SSI 24-pin + 8-pin + 8-pin power connectors / EPS12VNote: Two 8-pin connectors are required to support 2 CPUs due to SSI spec |
| Others | 1 SATA DOM power connector, TPM header |
| Expansion Slots | |
| PCI-E | 1 PCI-E 2.0 x8 (in x16 slot) 3 PCI-E 2.0 x8 1 PCI-E 2.0 x4 (in x8 slot) 1 PCI |
| Chassis (Optimized for H8DCL-6F ) | |
| 3U/Mid Tower | CSE-835TQ-R920B CSE-936A-R900B CSE-936A-R1200B CSE-732i-500B |
| Tower/4U Rackmount | CSE-743TQ-865B CSE-743TQ-865B-SQ CSE-743TQ-R760 CSE-745TQ-800B CSE-745TQ-920B CSE-745TQ-R800B CSE-842TQ-665B CSE-846A-R1200B CSE-846E1-R900B CSE-846E16-R1200B CSE-846E2-R900 CSE-846E26-R1200B |
| System BIOS | |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3 |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) 2.0 Super  Doctor III |
| Power Configurations | ACPI Power Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator |
| FAN | Up to 6-fan status tachometer monitoring Up to 6x 4-pin fan headers Status monitor for speed control 4-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic |
| LED | CPU / System Overheat LED +5V Standby Alert LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Operating Environment / Compliance | |
| RoHS |  RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
| Regulatory | |
| FCC | Passed to meet FCC standard requirement |
キーワードから探す
CLOSE
