製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-H8QGL-6F | H8QGL-6F (Standard Retail Pack) |
| Physical Stats | |
| Form Factor | SWTX |
| Dimensions | 16.48" x 13" (41.9cm x 33.0cm) |
| Processor/Chipset | |
| CPU | Quad 1944-pin Socket G34 Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support |
| Chipset | Dual AMD SR5690 and SP5100 |
| System Memory | |
| Memory Capacity | 16 DIMM sockets Supports up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1866/1600/1333/1066 SDRAM in 16 DIMMs Quad channel memory bus See Detailed Memory Support Matrix |
| Memory Type | DDR3 1866/1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | LSI 2008 8 port SAS controller RAID 0, 1, 10; RAID 5 Optional Optional: AOC-SAS2-RAID5-KEY RAID 5 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM+450 BMC |
| Network Controllers | Intel® 82576 dual-port Gigabit Ethernet LAN 10/100/1000BASE-T support |
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| Input / Output | |
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| SAS | Integrated LSI 2008 SAS2 Controller Eight Serial Attached SCSI (SAS) ports Each SAS port supports up to 4 SAS / SATA drives |
| LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
| USB | 7x USB 2.0 ports 2x Rear, 2x header-4x ports, and 1x TypeA |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x serial port header |
| Others | 1 SATA DOM power connector, TPM header |
| Expansion Slots | |
| PCI-E/PCI | 3 PCI-E 2.0 x16 2 PCI-E 2.0 x8 (in x16 slots) 1 PCI-E 2.0 x4 (in x16 slot) |
| Chassis ( Optimized for H8QGL-6F ) | |
| 2U Chassis | CSE-828TQ+-R1K43LPB Requires rev. K chassis, air shroud MCP-310-82801-0N* |
| Note | * Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list. |
| System BIOS | |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.2 ACPI 1.0/2.0 USB Keyboard Support SMBIOS 2.3 Real Time Clock Wakeup |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) 2.0 Super  Doctor III |
| Power Configurations | ACPI Power Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator |
| FAN | Up to 9-fan status tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed & on/off control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 9x Fan connectors I2C Temperature Sensing Logic |
| LED | CPU / System Overheat Suspend-state indicator +5V Standby Alert UID/Remote UID |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Operating Environment / Compliance | |
| RoHS |  RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
| Regulatory | |
| FCC | Passed to meet FCC standard requirement |
キーワードから探す
CLOSE
