製品仕様
| Product SKUs | |
|---|---|
| AS-2042G-72RF4 | A+ Server 2042G-72RF4 (Black) |
| Processor/Chipset | |
| CPU | Quad 1944-pin Socket G34 Supports up to four 16/12/8/4-Core ready AMD Opteron 6000 Series processors HT3.0 Link support |
| Chipset | AMD SR5690/SR5670/SP5100 Chipset |
| System Memory | |
| Memory Capacity | 32 DIMM sockets Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs Quad channel memory bus For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix |
| Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | LSI 2208 8-port SAS2 controller HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB cache) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC |
| Network Controllers | Intel® I350 controller, 4-Port Gigabit Ethernet 10/100/1000BASE-T support |
| VGA | Matrox G200 16MB DDR2 graphics |
| Super I/O | Winbond® W83527 chip |
| Input / Output | |
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| SAS | SAS2 x8 |
| LAN | 4 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
| USB | 7x USB 2.0 ports 2x Rear, 4x internal header, and 1x type A |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x serial port header |
| Expansion Slots | |
| PCI-Express | 2x PCI-E 2.0 x16 slots 2x PCI-E 2.0 x8 slots AOC Compatibility Matrix |
| System BIOS | |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3 |
| Chassis | |
| Form Factor | 2U Rackmount |
| Model | CSE-828TQ+-R1K43LPB |
| Dimensions | |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 28.2" (716mm) |
| Gross Weight | 69 lbs (31.3kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED |
| Drive Bays | |
| Hot-swap | 6x 3.5" SAS/SATA Hot-swap drive trays Enterprise SATA HDD only recommended |
| System Cooling | |
| Fans | 6x 80mm 6500 RPM fans |
| Power Supply | |
| AC Voltage | 100-240 V, 50-60 Hz, 15 Amp max |
| +12V | 100 Amp/115 Vac 117 Amp/230 Vac |
| With Power Distributor | +5V: 30 Amp +3.3V: 25 Amp -12V: 0.6 Amp |
| Certification | |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, sVBAT, HT, memory, chipset CPU switching voltage regulator |
| FAN | Up to 9-fan status tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 9x fan connectors I2C Temperature Sensing Logic |
| LED | CPU / System Overheat LED +5V Standby Alert LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 30°C (50°F to 86°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel:03-3815-9001
URL:https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel:03-3815-9001
URL:https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします!
まずはお気軽にお問い合わせください。
