製品仕様
| Product SKUs- Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| SYS-1026T-6RF+ | SuperServer 1026T-6RF+ (Black) |
| Motherboard | |
| Motherboard | Super X8DTU-6F+ |
| Processor/Cache | |
| CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W |
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | 18x 240-pin DIMM slots Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| Note: | This board does not support LRDIMM memory. |
| On-Board Devices | |
| Chipset | Intel® 5520 (Tylersburg) chipset ICH10R |
| SAS | Broadcom 6Gbps SAS 2108 w/ Hardware RAID support RAID 0, 1, 5, 6, 10, 50, 60 support BBU (battery backup) extension kit (optional) |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| Input / Output | |
| SAS | 8x 6Gbps SAS / SATA ports with 2 I-PASS connectors |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| LAN | 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB rear ports 1x USB on-board 2x USB internal headers Total 5 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option) |
| Chassis | |
| Form Factor | 1U Rackmount |
| Model | CSE-119TQ-R700UB |
| Dimensions | |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 26.6" (676mm) |
| Gross Weight | 43 lbs (19.45 kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off Button System Reset Button UID Button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Expansion | 2 (x8) PCI-E 2.0 slots (Left Slot) 1 (x4) PCI-E 2.0 (in x8 slot -Low-Profile - 5.5" depth) (Right Slot) UIO AOC Compatibility Matrix |
| Drive Bays | |
| Hot-swap | 8x 2.5" SAS / SATA Hot-swap drive trays |
| Peripheral Drives | |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM drive |
| Backplane | |
| Backplane | 1U SAS/SATA Backplane w/ SES2 Enclosure Management |
| System Cooling | |
| Fans | 5x Cooling Fans |
| Shroud | 1x Air Shroud |
| Power Supply | |
| Power Supply | 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
| AC Input | 700W: 100-140 V, 50-60 Hz, 8.5-6 Amp 750W: 180-240 V, 60-50 Hz, 5-3.8 Amp |
| DC Output+5V standby | 3 Amp |
| DC Output+12V | 700W: 58 Amp @ 100-140V 750W: 62 Amp @ 180-240V |
| With Power Distributor | +5V: 25 Amp +3.3V: 25 Amp -12V: 0.6 Amp |
| Certification | |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel:03-3815-9001
URL:https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel:03-3815-9001
URL:https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします!
まずはお気軽にお問い合わせください。
