製品仕様
| Product SKUs | |
|---|---|
| SYS-6015TW-TB | SuperServer 6015TW-TB (Black) |
| SYS-6015TW-TV | SuperServer 6015TW-TV (Silver) |
| Motherboards | |
| Motherboards | Super X7DWT |
| Processor/Cache | |
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
|
| System Bus | 1600 / 1333 / 1066 MHz system bus |
| System Memory | |
| Memory Capacity | Eight 240-pin DIMM sockets Supports up to 64 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Sparing supported |
| Memory Type | 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8 V or 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | Intel® 5400 (Seaburg) chipset ESB2 |
| SATA | Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0, v.1.5 200-pin IPMI slot (SIMSO(+)) (Optional: AOC-SIMSO(+)) |
| Network Controllers | 2Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK410B |
| Input / Output | |
| Serial ATA | Four Serial ATA ports |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB internal headers Total 4 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Serial Port | 1 Fast UART 16550 serial port |
| System BIOS | |
| BIOS Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0 USB Keyboard support SMBIOS 2.3 |
| Chassis | |
| Form Factor | 1U Rackmount |
| Model | SC808T-980B |
| Dimensions | |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705mm) |
| Gross Weight | 40 lbs (18.1kg) |
| Available Colors | Black |
| Front Panel (per Node) | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| Expansion Slots (per Node) | |
| PCI-Express | 1 (x16) PCI-e Generation II slot |
| Drive Bays (per Node) | |
| Hot-swap | 2x 3.5" SATA Hot-swap drive bays |
| SATA Backplane | |
| SATA Backplane | 1U SATA Backplane |
| System Cooling | |
| Fans | 6x Cooling Fans |
| Power Supply | |
| Power Supply | 980W AC-DC power supply w/ PFC |
| AC Input | 100 - 240V, 60-50Hz, 14-6 Amp |
| +5V sb | 4 Amp |
| +12V | 81 Amp |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem remote ring-on |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of four proprietary fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Operating Environment | |
| Environmental Specifications | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel:03-3815-9001
URL:https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel:03-3815-9001
URL:https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします!
まずはお気軽にお問い合わせください。
