製品仕様
| Product SKUs | |
|---|---|
| MBD-M11SDV-8CT-LN4F | M11SDV-8CT-LN4F |
| Physical Stats | |
| Form Factor | Mini-ITX |
| Dimensions | 6.7" x 6.7" (17cm x 17cm) |
| Processor/Cache | |
| CPU | Single AMD EPYC™ 3201 SoC Processor |
| Cores | 8 Core/8 Thread |
| Chipset | System on Chip |
| System Memory | |
| Memory Capacity | 4 DIMM slots Supports up to 512GB Registered ECC DDR4 2133MHz SDRAM in 4 DIMMs 2-channel memory bus |
| Memory Type | DDR4 2133 MHz Registered ECC, 288-pin gold-plated DIMMs |
| DIMM Sizes | 8GB, 16GB, 32GB, 64GB, 128GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| SATA | SATA3 (6 Gbps) |
| Network Controllers | 4x 1GbE with Intel® I350-AM4 1 Realtek RTL8211E PHY (dedicated IPMI) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC |
| VGA | ASPEED AST2500 BMC |
| Input / Output | |
| SATA | 4 SATA3 (6 Gbps) ports |
| LAN | 4 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 ports 6 USB 2.0 ports |
| VGA | 1 VGA port |
| Others | 1 COM port header 1 TPM 2.0 header |
| Expansion Slots | |
| PCI-Express | 1 PCI-E 3.0 x16 slot |
| M.2 | Interface: 1 PCI-E 3.0 x4 Form factor: 2280 Key: M-key |
| Chassis ( Optimized for M11SDV-8CT-LN4F ) | |
| 1U | SCE300 SCE301 |
| System BIOS | |
| BIOS Type | AMI 128Mb Flash EEPROM |
| Management | |
| Software | Super Doctor 5Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN |
| Power Configurations | ACPI Power Management Power-on mode control for AC power loss recovery |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +1.8V, +3.3V, +12V CPU switching voltage regulator Supports system management utility VBAT |
| FAN | Up to 3 fan status tachometer monitoring Up to 3 4-pin fan headers Dual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic |
| LED | CPU / System Overheat LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header UID |
| Operating Environment / Compliance | |
| Environmental Specifications | Operating Temperature: 0°C to 60°C (32°F to 140°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
キーワードから探す
CLOSE
